Dell M209X Quick Start Manual

Quick Start Guide
Standard Meeting Projector - Dell M209X

Initial Setup

Make sure your projector and computer are both turned OFF
1 1
Connect VGA cable (blue) to "VGA In" on projector and VGA input on
2
computer
3 3
Connect power cable (black) to projector and an electrical outlet
4 4 Connect USB cable (red) to projector and any available USB port on your computer
Getting Up and Running
Remove lens cap and press POWER button
5 5
Turn ON your computer
6 6
7 7 If necessary, sync projector & computer by holding down FUNCTION

Adjusting the Image

8 8 Push button to release stand
9 9 Slide ZOOM TAB to reach appropriate size
10 10 Rotate lens to focus
Fn
and pressing one of the following keys to toggle:
9
10 10
8
F4
F5
F7
LCD
F8
CRT/LCD
NOTE: Depending on your computer, you
may have to use a different F key than those
listed above. If you have any problems,
please give us a call at 1-877-633-8866
/
/
VGA