Yamaha PGM1 Installation Manual page 10

Controls and Connectors (PGM1)
Switch
Setting
Function
Switch
Setting
Function
Switch
Setting
Function
Switch
Setting
Function
Switch
Setting
Function
Switch
Setting
Function
10 PGM1/PGX1 Installation Manual
1 2 3
UNIT ID is "2x"
The [UNIT ID] rotary switch
setting has a range of 20
through 2F.
1 2 3
UNIT ID is "3x"
The [UNIT ID] rotary switch
setting has a range of 30
through 3F.
1 2 3
UNIT ID is "4x"
The [UNIT ID] rotary switch
setting has a range of 40
through 4F.
1 2 3
UNIT ID is "5x"
The [UNIT ID] rotary switch
setting has a range of 50
through 5F.
1 2 3
UNIT ID is "6x"
The [UNIT ID] rotary switch
setting has a range of 60
through 6F.
1 2 3
UNIT ID is "7x"
The [UNIT ID] rotary switch
setting has a range of 70
through 7F.
• Switches 4–5
Not used. Leave these in the factory-set
position (upward).
• Switch 6 (IP SETTING)
Specifies how to set the IP address
used for communicating with external
devices.
Switch
6
Setting UNIT ID
The IP address is determined
Content by the UNIT ID, and will be
"192.168.0.(UNIT ID)" .
Switch
6
Setting PC
The IP address is determined
by the setting in MTX-MRX
Content
Editor (see "MTX-MRX Editor
User Guide").
NOTE
You must set the "UNIT ID" the first time you
connect this unit to a computer after pur-
chase. Also, if you subsequently want to
specify an IP address without using the UNIT
ID, use MTX-MRX Editor to specify the IP
address and then switch to "PC."