Table of Contents
Advertisement
Step 1: Driver installation
To install the GPIB driver package on your computer:
1.
Insert the Keithley Instruments Product Information CD-ROM.
2.
Allow the CD-ROM to autorun and begin the setup program. If setup does not start, open the
CD-ROM using Microsoft Windows Explorer and double-click setup.exe to launch the setup
program. When setup executes, the KI-488 Driver CD installation screen opens (see
Figure 2: KI-488 Driver CD installation screen
3.
Follow the prompts to complete the setup procedure.
4.
You may choose to install the Keithley command-compatible driver or the NI
command-compatible driver. Refer to Models KPCI-488LPA and KUSB-488B Reference Manual
(part number KI488-901-01) for available functions of either compatible driver.
5.
When setup finishes, click Yes to restart your system (see
Figure 3: Restart system
4
Model KUSB-488B USB to GPIB Converter Quick Start Guide
Figure
KUSB-488B-903-01 Rev. A / March 2010
Figure
3).
2).
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KUSB-488B and is the answer not in the manual?
Questions and answers