LB-Link BL-MP01 Quick Installation Manual

D e v i c e c o n n e c t i o n
Quick I n s t a l l a t i o n Guide
Wireless Pocket Router
List of items: -Wireless pocket router • Power adapter DC 5V 500mA(Optional)
•Internet cable »USB cable -Quick installation Guide
Introducing the МР-01's Seven Modes
S " 6 " * 8 . .
Switch Mode How It Work
Connection
о т R o u t e r m n r i s MP01 connects to the modem via network cable.and Wireless
к i r c o u r e r moae | | devices t o use. Connection
Hardware connection diagram
b r o a d c a s t s W R s i g r i a f o r o t h e r
niiant riiant mnHa MP01 connects to computer via network cable,allowing Wired
u i e m uiemmoae computer to connect to other WIFI networks. Connection
Note: In this mode,you can configure the router settings by connecting via WIFI
Д Р m n H o MP01 connects to wired network via network cable, Wireless
and following step 4:"Router Configuration-RT Mode".Connecting a desktop
ftr* moae j broadcasts WIFI signal. Connection
a r K computer requires an installed WIFI card.
. . . . MP01 connects to wired network via network cable, Wirelessand
д р г
р A ^ u i e m and broadcasts WIFI signal. Wired Connection
Д
Relav MPQ^ amplifies existing WIFI signal, Wireless and
" strengthening network in weak signal areas. Wired Connection
Bridae MP01 connectstowirelessnetworkviaWIFI, Wired
9
allowing 2 wired LANs to be wirelessly connected. Connection
Multipoint MPOIconnectstowirelessnetworkviaWIFI, Wirelessand
connection allowingS+wiredLANstobewirelesslyconnected. Wired Connection
Click "Start",select "Control Right-click your Wireless
Panel",and open "Network Network Connection and
Connections". select "Properties".
These instructions apply to user of both Windows 2000 and XP.
Click "Refresh Network List",find
Right-click the icon which is at the
bottom right corner of your start bar.ln "B-LINK-MP01" and click "Connect".
the menu,choose "ViewAvailable
Wireless Networks".
This guide introduces the three commonly used modes when setting up a network.You can select each mode by sliding the switch so that it matches the below illustration.
For more in-depth descriptions,as well as adbanced feature settings,please cisit the official B-LINK website:http://www.b-link.net.cn.
Hardware connection diagram
Note: In this mode,the MP01 acts as a WIFI receiver and does not broadcast
a WIFI signal.Sharing the network via network cable requires the MP01 to be
connected.
When complete,please follow steps2,3,and 4"RT Mode "to configure. ' When complete,please follow steps 2 and 4"Client Mode"to configure.
Double click on "Internet Make sure that your computer has selected
Protocol (TCP/IP)". "Obtain an IP address automatically" and
"Obtain DNS server address automatically",
then click "OK" twice to close the windows.
When the screen shows "Connected", it
means that your computer has connected
to the wireless network successfully.
Hardware connection diagram
Note: In this mode,the MP01 connects to the wired network connection and
broadcasts a WIFI signal for other devices to access the network.
Requirements:
1 .Primary network devices can automatically assign IP addresses.
2.Primary network devices do net set MAC address or website filters.
3.Primary network devices currently have access to the internet.
Setup should now be complete.To set up wireless network encryption,please
follow steps 2,3,and 4"Client Mode".
Click"Start",then open "Control Panel". Double click on"lnternet
Select "Network and Internet" and open Protocol Version 4(TCP/IPv4)".
"Network and Sharing Center".Choose
"Change Adapter Settings",right-click
"Wireless Network Connection",and
click on "Properties".
These instructions apply to users of both Windows Vista and 7.
Click on the lower right of the menu Select the "B-LINK-MP01 "Network
fortherfffjj icon.which will show a and then click on the connect button.
list of wireless networks to select.
Make sure that your computer has selected
"Obtain an IP address automatically" and
"Obtain DNS server address automatically",
then click "OK" twice to close the windows.
When the screen shows "Connected",
then your computer has connected
to the wireless network successfully.