Introduction; General Information; Unit Nameplate; Hazard Identification Information - Daikin DPS005 Installation And Maintenance Manual

General Information

This manual provides general information about the "A"
vintage Daikin Rebel Commercial Packaged Rooftop Unit,
model DPS. In addition to an overall description of the unit,
it includes mechanical and electrical installation procedures,
commissioning procedures, sequence of operation information,
and maintenance instructions.
The MicroTech III rooftop unit controller is equipped on
®
"A" vintage rooftop units. For a detailed description of the
MicroTech III components, input/output configurations, field
wiring options and requirements, and service procedures,
see OM 1141. For operation and information on using and
programming the MicroTech III unit controller, refer to the
appropriate operation manual (see
For a description of operation and information on using
the keypad to view data and set parameters, refer to the
appropriate program-specific operation manual (see
Table 1: Program Specific Unit Operation Literature
Rooftop unit control configuration
BACnet IP Comm Module
BACnet Integration
®
L W Integration
®
on orks
DPS Unit Controller Discharge
Air Control (VAV or CAV)
Space Comfort Control (SCC)
Rebel Quick Start Guide
Nomenclature (DPS 003–028)
Daikin Packaged System
Nominal capacity
003 = 3 tons 016 = 16 tons
004 = 4 tons 018 = 18 tons
005 = 5 tons 020 = 20 tons
006 = 6 tons 025 = 25 tons
007 = 7 .5 tons 028 = 28 tons
010 = 10 tons
012 = 12 tons
015 = 15 tons
Design vintage
A = Vintage 1
Cooling efficiency
H = High (exceeds ASHRAE 92)
www.DaikinApplied.com
Table 1).
Table 1) .
Manual
bulletin number
IM 916
IM 917
IM 918
OM 1141
OM 1164
DPS – 010 – A H H G 4

Unit Nameplate

The unit nameplate is located on the outside of the main
control box door. It includes the unit model number, serial
number, electrical characteristics, and refrigerant charge.

Hazard Identification Information

Dangers indicate a hazardous situation which will result
in death or serious injury if not avoided.
Warnings indicate potentially hazardous situations,
which can result in property damage, severe personal
injury, or death if not avoided.
Cautions indicate potentially hazardous situations,
which can result in personal injury or equipment damage
if not avoided.
3
I
nTroduCTIon
DANGER
WARNING
CAUTION
Line voltage
2 = 208 volt power supply
3 = 230 volt power supply
4 = 460 volt power supply
5 = 575 volt power supply
Heat medium
Y = None (cooling only)
G = Natural gas heat
E = Electric heat
W = Hot water heat
Unit style
C = Cooling only
H = Heat pump
M = Cooling-only microchannel
IM 1125-7 • REBEL ROOFTOPS
I
nTroduCTIon