Quelima SQ11 User Manual

05/05/2018
SQ11 mini DV. User Guide.
| Home | User Manual
Q7 SQ8 SQ9 SQ10 SQ12
built-in lithium-ion battery. You can perform charging in one of the
following ways:
1. Connect the mini video camera to the USB port of your PC, stop
recording first.
2. Connect the mini camera to a charger from a 220V network or a
portable 5V charger. In this case, you can continue to use the mini-
camera in the charging process. In the charging process, the
and red LEDs will light constantly.
After the mini camera battery is fully charged, the
constantly and the
• If the built-in battery is empty or there is not enough space on the
memory card to continue, the
camcorder will blink for 5 seconds simultaneously, after which the
mini camcorder will save the recorded video and automatically turn
off.
• If the memory card is not installed, the
Mini Recorder will blink simultaneously for 5 seconds, after which the
Mini Camera will automatically turn off.
• If the camcorder is in the standby mode and does not take any
action on it, the camcorder automatically turns off after 1 minute to
save the charge of the built-in battery.
http://org-info.mobi/shop/sq11-mini-dv-guide-en.htm
SQ11 mini DV. User manual. English.
| SQ11
red LED will turn off.
blue and
|
Operating Instructions
SQ11

Charging

Attention! Before using for the
first time, fully charge the mini
camera battery!
This mini video camera has a
blue
red LEDs on the mini
blue and red
blue
LED will light
LEDs of the
1/4