Emerson Numatics G2-2 series Quick Start Manual

Getting Started
This is a brief document designed to quickly get you started setting up your valve manifold with an integrated
Numatics' G2-2 DeviceNet communication node. Please note that this document is not intended to replace
the G2-2 DeviceNet Technical Manual which includes more detailed technical information. The full technical
manual can be found on the Numatics website at
248-887-4111.
1) Initial Unpacking and Inspection
1) Examine exterior of package for signs of damage. Report any damage to shipping carrier.
2) Remove wrapped manifold assembly from box.
a) Remove manifold assembly from anti-static packaging
b) Retain documentation for installation and configuration
3) Examine manifold assembly for any shipping damage such as:
a) Bent pins or connectors
b) Report any damage to shipping carrier immediately
4) Examine manifold assembly for proper ordered configuration. (Valves, I/O, Protocol, etc.)
2) G2-2 Introduction
Below is an example of a 2012 series valve manifold. This fieldbus manifold series is capable of addressing a
total of 224 I/O. The manifold can be viewed as having two sections to it, the
Side . The Valve Side
maximum of 6 modules totaling 192 Outputs, 96 Inputs, or various combinations. The communication
module has two connectors: a 5-pin communication connector and a 4-pin power connector. Pin-outs for
these, along with I/O connectors, are labeled on the side of the respective modules.
Dual 25 Pin Sub-D
w/Aux Power
Output Module
Analog Module
G2-2 Series DeviceNet Quick Start Manual
supports a maximum of 32 solenoid coils and the
(Maximum of 6 Modules)
Discrete I/O
Connectors
I/O Point
LED Status
Indicator(s)
19 Pin Round
Connector Module
8 Connector I/O Module
Terminal Strip Module
TDG22DNQS5-0
Subject to change without notice
www.numatics.com/fieldbus
www.numatics.com or can be ordered by calling
Discrete I/O Side
Discrete I/O Side
(Maximum of 32 Solenoids)
Module/
Network
Status LED's
NET STATUS
MOD STATUS
Device Net
FUSE 1
+24V VLV/OUT
FUSE 2
+24V NODE/IN
Communications
Module (Node)
Manual Configuration
Module (MCM)
1/07
Valve Side and the Discrete I/O
supports a
Valve Side
Chassis Ground
Connection
Valve
End Plates
Valve
Valve Side
Sub-D Output
Module
Manual
Override
Solenoid LED
Status Indicator
Page 1