Setting Up Before The Round - Alphard Golf USA eWheels Club Booster Owner's Manual

Setting Up Before the Round

Step 1
Unfold your push cart.
Step 2
Fully extend the wheels on your Club Booster.
Step 3
Place the Axle Clamps onto the axle. Make sure
the clamps are laying on the flat surface of the
axles and not on the plastic end caps. Got back to
"Adjusting the Wheelbase" on the previous page if
the wheelbase is not wide enough.
Step 4
Fully tighten the cam lever on the Axle Clamp.
Reverse these steps to disassemble after the
round.
10