Alfa Network WiFi-Camp Pro 2 Installation Manual page 2

How to Start WiFi-CampPro 2 Device Configurations
When device portal page is connected, to ensure security of device access,
please setup device management password, and click " Submit ".
Please setup login password (minimum 5 characters) when using device for the very
rst time.
CampPro Wi-Fi Extender Router default parameters :
wificamppro2.myalfasetup.com
Default Device Access :
admin
Default User Name :
defined by user
Default Password :
WiFiCampPro2-xxxxxx
Default SSID :
Default Wireless Encryption Type :
If password lost or forgotten, while device is ON, press
bottom for 10 seconds then release. Wait for one minutes, device will reboot
with factory default settings and please repeat the log-in process to setup new
management password.
Connecting WiFi-CampPro 2 to Remote WiFi HotSpot Station
- Select the target access point / hotspot site.
- Click on the arrow icon at the end of the column.
- Insert WiFi password to connect to the target hotspot.
When the target hotspot is password-protected, please contact hotspot service
provider to obtain connection parameters.
CampPro WiFi settings
SSID Password / Passkey
- In " " and "
Wi-Fi password for users/device to connect to
Finish
- Click " " device will start to connect the target hotspot / wireless access
point, and its connection status will be shown.
or 192.168.36.1
None
RESET
button on the
4
" columns, setup a preferred name and
CampPro Wi-Fi Extender
6
Connecting WiFi-CampPro 2 to Remote WiFi HotSpot Station
After logging-in, device wizard will scan hotspot signal.
Results of hotspot signal scan will be displayed on the screen.
WiFi-CampPro 2 Connection Status
Once the wireless connection with target hotspot/access point is established,
the connection status will be shown in the status screen.
Clients connected with Camp Pro Wi-Fi Extender Router status is shown at
second column.
Clicking on the "
Router.
This guide introduces instructions and tips for device rst-time installation.
This guide is not intended to be a substitute for the user's manual.
For more product information, please visit ALFA website for latest product
news, and updates.
5
Status
" on left control panel will refresh machine run-time status.