Table of Contents
Related Manuals for Amazing Machinery Viztrac AM 100
Summary of Contents for Amazing Machinery Viztrac AM 100
- Page 1 VIZTRAC VIZTRAC VIZTRAC 3807 Old Tasso Rd. NE VIZTR C User’s Guide Cleveland, TN 37312-5732 STANDARD FIXED HEAD 100' 130' 150' 200' 225' AM 100 AM 200 AM 240 512hz Built-In Sonde AM 140 AM 200B AM 240B...
- Page 2 DVR Quick Start Instructions How to work basic functions with your DVR • After turning system power ON, ensure monitor is on the correct Input: TO SET UP HOW YOU WANT TO RECORD- example manually by remote, - Video should show “Insert SD Card” if none present, or an SD Card motion detection etc.
-
Page 3: Table Of Contents
TABLE OF CONTENTS Diagram & Equipment Specifications ... 4 Equipment Specification & Safety Instructions ..... 5 AM 100/140 Operation . -
Page 4: Diagram & Equipment Specifications
WARRANTY INFORMATION DIAGRAM & SPECIFICATIONS Included Not Pictured - 7” LCD Color Monitor - 512 hz Built in Sonde (Not on the AM100/140 - DVR (Not on the AM100/140 www amazingmachinery com www amazingmachinery com... -
Page 5: Equipment Specification
EQUIPMENT SPECIFICATIONS moisture. If head has been tampered with or abused, a seal may have broken and allowed moisture into the head. This would cause a blurry -Wrong setting set on Monitor or Recording Device or scrambled picture. Camera System should then -Faulty Video Cable be diagnosed by a repair technician -Broken or damaged monitor or recording device... -
Page 6: Am 100/140 Operation
AM 100/140 OPERATION “NO SIGNAL” FLASHING ON MONITOR Possible Problems: -Wrong setting set on Monitor or Recording Device The AM 100/140 camera DOES NOT come with a sonde -Faulty Video Cable transmitter for locating or a DVR for recording. -Broken or damaged monitor or recording device -Broken or loose connection in camera head or control Once you have inspected all components to make sure box. -
Page 7: Am 200/240 Operation
Monitor or Recording Device is dirty and needs to be cleaned.See Monitor Instruction Booklet for cleaning instructions. If problem persists, please contact a repair technician at Amazing Machinery. www amazingmachinery com www amazingmachinery com... -
Page 8: Control Panel For Am 200/240
AM 200/240 CONTROL PANEL TROUBLE SHOOTING The trouble shooting guidelines below are designed to help you out in the field. If you cannot figure out the problem or fix it without voiding your warranty, please call the number listed in the back of your manual to speak with a repair technician. -
Page 9: Am 200/240 Sonde/Dvr Operation
AM 200B/240B CONTROL PANEL AM 200/240 OPERATION SONDE OPTION: Your camera came equipped with a 512 Hz transmitter, built inside the camera head. Please refer to the previous diagram 1.A to activate the built in transmitter. Simply press the sonde switch located on the main control panel. -
Page 10: Am 200B/240B Operation
AM 200B/240B OPERATION AM 200B/240B OPERATION (CONT.) When you receive the camera, plug the battery up with 9” MONITOR ROTATION FEATURE the enclosed power adapter into the input port to get a To rotate the angle on the monitor, first determine if you full charge.
Need help?
Do you have a question about the Viztrac AM 100 and is the answer not in the manual?
Questions and answers