Checking The Spark Plug - Yamaha Aerox GDR155 Owner's Manual

Hide thumbs Also See for Aerox GDR155:
Table of Contents

Advertisement

1. Floorboard mat
To install the panel
1. Place the panel in the original po-
sition, and then install the screws
and bolts.
3
1
1. Panel B
2. Screw
3. Bolt
2. Place the right floorboard mat in
the original position and push it
downward to secure it.
3. Install panel A.
1
2
Periodic maintenance and adjustment
9-8

Checking the spark plug

The spark plug is an important engine
component, which is easy to check.
Since heat and deposits will cause any
spark plug to slowly erode, the spark
plug should be removed and checked
in accordance with the periodic main-
tenance and lubrication chart. In addi-
tion, the condition of the spark plug
can reveal the condition of the engine.
To remove the spark plug
1. Remove panel A. (See page 9-7.)
2. Remove the spark plug cap.
1
1. Spark plug cap
3. Remove the spark plug as shown,
with a spark plug wrench available
at a Yamaha dealer.
EAUT2075
9

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Aerox GDR155 and is the answer not in the manual?

Questions and answers

Michael
March 7, 2025

Hello po first time ko kasi magka motor. Automatic po ba nagoon ang headlight ng aerox?

Gerhard Jehle-Argenton
March 20, 2025

Beim Starten flackert das Display vom Tacho.

1 comments:
Mr. Anderson
March 20, 2025

The display flickers because the Yamaha Aerox GDR155 performs a self-diagnostic test when the main switch is turned on and the vehicle starts moving at a speed of 10 km/h (6 mi/h) or higher. This test ensures that the system is functioning correctly.

This answer is automatically generated

This manual is also suitable for:

Aerox gdr155-rAerox gdr155-a

Table of Contents

Save PDF