Page 3
shock, water leak, ire etc. Consult your dealer or other qualiied service personnel for the appliances. Insuficient ventilation may cause irmly in place. unit. It may cause insuficient performance or equipment damage and possible ire. • Do not install the unit in a place where inlam mable gas may leak.
Page 6
Keep ilter clean to ensure the most eficient operation • Use of certain luorescent lamp in the same...
Page 8
• The vertical airlow louvre will swing. • The vertical airlow louver will be set • The vertical airlow louvre will return to the Hold the horizontal airlow louvre le vers and adjust the airlow direction. Never attempt to adjust the vertical airlow •...
Page 12
low direction or timer setting during the SELF...
Page 13
Remove the ilters. Pull the air ilters down to remove them. Clean the ilters. the ilters are dirty, wash them with warm water and a mild detergent. Dry ilters in Clean the ilters, then reinstall them. Reinstall the ilters and close the Make sure that the air ilters are not...
Page 14
• Check the ilters. If dirty, clean them. refrigerant lowing inside the unit.
Page 17
COMFORT POWERFUL JET / SUPER JET ON / OFF BABY MODE PLASMACLUSTER GENTLE COOL AIR FAN THERMOSTAT MODE SWING TIMER OFF TIMER ON CANCEL SELF CLEAN RESET DISPLAY SWING AUTO / COOL / DRY * SMD...