Replace Engine Mount Tubes - North Wing Sport X2 582 Maintenance Manual

North&Wing&S,LSA&Maintenance&Manual&
1.! Remove wing from trike.
2.! With mast in full upright position, unclip and remove the pin at lower end of cylinder.
Pin Clipped
3.! Unbolt the upper end of the cylinder at the mast.
4.! Replace with new cylinder.
4.3.13& Replace Engine Mount Tubes
Skill Level: LSR-M, A&P
Tools: Standard metric wrench set, Philips screw driver, wire cutters,
Materials: Replacement parts
Task Description:
1.! Remove propeller from drive shaft.
2.! Disconnect all electrical wires and label where they connect.
3.! Disconnect throttle and choke cables at the carburetor.
4.! Disconnect two fuel lines from fuel pump to carburetor. Be sure fuel line it tied up
high to avoid siphoning gas from the fuel tank.
5.! Drain coolant from cooling system and disconnect coolant hoses at water pump and
radiator reservoir tank.
6.! Disconnect exhaust manifold from muffler at the first exhaust ball joint flange.
7.! Remove four 10mm nuts attaching engine to engine mount. Remove engine and set
aside.
8.! Remove two 3/8" bolts connecting engine mount to backframe and two ¼" bolts
connecting sway bars.
9.! Separate engine mount from the backframe and disassemble.
10.!Replace with new parts and re-assemble in reverse order.
Issue 3.2
Model:&Sport&X2&582&
Printed: July 16 2017
Pin Unclipped
Page 72