Advertisement
CARDIN S449 QZ2 – S449 QZ4 – S449 QZ4M - S486 QZ2 - QZ4
Programming of your new remote control:
There are several methods for programming your new remote control.
From a remote control that has already been programmed:
1. Approach your motor so you are standing a few feet away from it.
2. With a sharply pointed object, press the hidden button from your already-programmed
remote control (diagram above, P1). The receiver emits a beep. Let the button go.
3. Press a button on your already-programmed remote control. The receiver emits a beep. Let
the button go.
4. Press the button you wish to program on your new remote control. The receiver emits 2
beeps. Let the button go.
5. Repeat this procedure for each button you wish to program.
6. Wait 10 seconds.
7. Your new remote control is programmed.
http://www.remotecontrol-express.com
Programming Manual
- TEL : +44 (0) 207 399 7782 - FAX : +44 (0) 207 927 3151
Advertisement
Table of Contents
Related Manuals for Cardin S449 QZ2
Summary of Contents for Cardin S449 QZ2
- Page 1 Programming Manual CARDIN S449 QZ2 – S449 QZ4 – S449 QZ4M - S486 QZ2 - QZ4 Programming of your new remote control: There are several methods for programming your new remote control. From a remote control that has already been programmed: 1.
- Page 2 Programming Manual From the receiver : 1. Open the casing of your receiver. It is located next to your motor. 2. On the receiver circuit board (diagram above), press the programming button (MEMO). Keep it pressed down. The LED light of the receiver blinks. 3.
Need help?
Do you have a question about the S449 QZ2 and is the answer not in the manual?
Questions and answers