Saddle Stitcher Adjustment] - [Staple Paper Width Adj.] - Konica Minolta bizhub 1250 User Manual

5.3

[Saddle Stitcher Adjustment] - [Staple Paper Width Adj.]

5.3 [Saddle Stitcher Adjustment] - [Staple Paper Width Adj.]
Adjust the width of adjustment plates of Saddle Stitcher SD-513 to be used in Staple mode.
Objects of adjustment: Full Area (Offset for All Size), 11 e 17 w, A3 w, B4 w, 8.5 e 14 w, A4 w, 8.5 e 11 w,
B5 w, 8 e 13 w, 8.125 e 13.25 w, 8.5 e 13 w, 8.25 e 13 w, 8K w, 16K w, 12 e 18 w, A3W w, B4W w,
A4W w, B5W w, 12 e 18W w, 11 e 17W w, 8.5 e 11W w, Custom, SRA3 w, SRA4 w
NOTICE
With [Full Area] ([Offset for All Size]) selected, the entered value will be applied to all sizes. With a specific pa-
per size selected, set value will be the sum of the entered value and the value previously specified for [Full
Area] ([Offset for All Size]).
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Display the Staple Paper Width Adjustment Screen.
% In bizhub PRESS 1250/1250P/1052, press [02 Finisher Adjustment], [08 Saddle Stitcher Adjust-
ment], and [02 Staple Paper Width Adj.] in sequence.
% In bizhub PRESS C1070/C1070P/C1060/C71hc, press [04 Finisher Adjustment], [04 Saddle
Stitcher Adjustment], and [02 Staple Paper Width Adj.] in sequence.
% In bizhub PRESS C1100/C1085, press [03 Finisher Adjustment], [04 Saddle Stitcher Adjustment],
and [02 Staple Paper Width Adj.] in sequence.
3
Select the size to be adjusted using [+] or [,] to scroll.
4
Press [Print Mode].
5
Load the paper size selected in step 3 into the tray, then select that tray key.
6
Press Start on the control panel. A sample pattern will be output.
7
Check if the stapled set shows misalignment (a) (caused if specified paper width is larger than the actual
width), or is curved (b) (caused if specified paper width is smaller than the actual width).
Allowance: a = 1 mm or less
Saddle Stitcher SD-513
5
5-21