Samsung HG**EC770 Series Quick Setup Manual

Quick Setup Guide
To register this product please visit
www.samsung.com/register.
List of Parts
➣
The provided accessories may vary depending on the model.
2 3
1
5
4
6
8 9
7
Remote Control & Batteries (AAA x 2) Quick Setup Guide / Safety Guide
1 2
3 Data Cable 4 Power Cord
5 Holder-Wire Stand 6 Component Adapter
AV Adapter CI Card Adapter
7 8
Holder-Ring
9
BN68-05850D-01
Viewing the Connection Panel
1 RJP
VARIABLE
2
AUDIO OUT
3 VOL-CTRL
USB
4
(5V 0.5A)
/CLONING
HDMI IN
5
3 (DVI)
HDMI IN
2 (ARC)
HDMI IN 1
PC/DVI
6
AUDIO IN
7
8 9 0 !
[QSG-HC770-EU]BN68-05850D-01ENG.indd 1
Installing the LED TV Stand
Stand Parts
A B
Stand x 1 Guide Stand x 1
Follow the steps below to connect the TV to the stand. For more detailed instructions,
see the separate stand installation guide.
1
2
x4 (M4 X L12)
C
Top View
B
A
ATTENTION
DO NOT USE DO NOT USE DO NOT USE
CHEMICALS GREASE OIL
✎ Place a soft cloth over a table to protect the TV, and then
place the TV on the cloth screen side down.
✎ Insert the Stand Guide into the slot on the TV's bottom.
3 Side View
(Correct assembly)
4
➣ Whenever you connect an external device to your TV, make sure that power on the unit is
turned off.
➣ When connecting an external device, match the color of the connection terminal to the
cable.
1 RJP 7 HEADPHONE JACK
VARIABLE AUDIO OUT HP-ID
2 8
3 VOL-CTRL 9 ANT IN
USB (5V/0.5A) / CLONING PC IN
4 0
HDMI IN 1, 2(ARC), 3(DVI) COMPONENT IN / AV IN
5 !
PC/DVI AUDIO IN DATA
6 @
@
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. When attaching to
other building materials, please contact your nearest dealer. If installed on a ceiling
C
or slanted wall, TV may fall and result in severe personal injury.
➣
Standard dimensions for wall mount kits are shown in the table below.
(M4 X L12)
➣
Samsung wall mount kits contain a detailed installation manual. All parts necessary
for assembly are provided.
➣
Do not use screws that do not comply with the VESA standard screw
Screws
specifications.
➣
Do not use screws that are longer than the standard dimension or do not comply
with the VESA standard screw specifications. Screws that are too long may cause
damage to the inside of the TV set.
➣
For wall mounts that do not comply with the VESA standard screw specifications,
the length of the screws may differ depending on the wall mount specifications.
➣
Do not fasten the screws too firmly. This may damage the product or cause the
product to fall, leading to personal injury. Samsung is not liable for these kinds of
accidents.
➣
Samsung is not liable for product damage or personal injury when a non-VESA
or non-specified wall mount is used or the consumer fails to follow the product
installation instructions.
➣
Do not mount the TV at more than a 15 degree tilt.
➣
Always have two people mount the TV on a wall.
(Incorrect assembly)
x4 (M4 X L12)
C
Mixed Channel Map
Mixed Channel Map is a function to mix Air and Cable channels.
[ If there are no Cable channels, you can use this item as channel sorting. ]
– Mixed channel Map, Channel Editor and Channel Auto Store are newly placed in Hotel
Option Menu.
– Mixed channel Map should be ON in order to mix Air and Cable channels.
– Use Channel Editor to sort the channels as user-desired channel numbers.
Hospitality Mode Standalone System
SI Vendor OFF
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
Simple Steps for channel mixing under Stand-alone Mode
Step Broad Outline
1 Turn on 'Mixed Channel Map' in Hotel Option Menu
2 Operate 'Channel Auto Store' in Hotel Option Menu (Antenna Source : Air + Cable)
3 Enter 'Channel Editor' in Hotel Option Menu
4 Compile a table related to the final channel lists you want to have
5 Rearrange channels with TOOLS Button based on the table you compiled
6 Press EXIT or RETURN
VESA screw hole
Product TV size in
specs (A * B) in
Family inches
millimeters
32~40 200 X 200
HG**EC770
46 400 X 400
Do not install your Wall Mount Kit while your TV is turned on.
It may result in personal injury due to electric shock.
Hotel Plug & Play
Hotel Plug & Play is a function that automatically performs the Hotel mode selection,
Country Setup, Clock Setup and Picture mode Setup once.
– Hotel Plug & Play is available only one time when power is first turned ON.
– After setting up first TV and Clone TV to USB
– Next TV only needs to exit Hotel Plug & Play, connect USB, then Clone USB to TV.
♦ UI Scenario
Local Set
Change Local Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : EU If Standalone
Only is Selected
Change Skip
Easy Set up
If you select this, the
setup process will be
Interactive
completed and go to
c
hotel menu
(Hotel Menu)
Standalone Setup
(Continue Setup)
Standalone Only
(End Setup)
If Standalone
<Depending on model and region, Plug & Play is
selected
some menu items may not exist>
Select your Language
Select your language to start the on screen setup.
English
Press the ▲▼◄►
Eesti
buttons to move the
highlight.
Suomi
Press the enter button
to select.
Français
Deutsch
The Language Setting will be applied to Main Menu and not Plug and Play.
When pressing OK
button, the hotel
Hospitality Mode Standalone System
menu appears as
SI Vendor OFF
shown on the left.
Power On
Channel Complete the hotel
Menu OSD
menu settings, and
Clock
Button to exit. Music Mode then reset the TV.
Remote Jack Pack
You can use your TV.
External Source
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
Standard Screw
(Length * Quantity
Pitch in mm)
M8 4
Standalone mode is set
TV will enter the RF mode
<Depending on Region, this
Configure your TV
step may not exist.> After
Select your information in the
selecting the country in the
categories below.
Select the country that
you're in now
country menu, some models
Country Bulgaria
Picture Mode Standard may proceed with an additional
option to setup the pin number.
If you forget the PIN code, in
the Hotel menu, select the
SERVICE → TV Reset. And
set the pin code again in the
Plug & Play.
Auto Tuning
To receive channels, con gure the options
Select the connected aerial
below then select Scan.
that you want to use to get
channels.
Aerial Air
Channel Type Digital & Analogue
After Searching
the channels.
Scan
Auto Tuning
Clock
You can adjust your time to set DST, Time Set current date and time Auto Tuning Complete.
Zone and clock mode
Clock Mode Auto
Digital 0
Date --/--/---- TV 0
Radio 0
Time --:--
Data/Other 0
Analogue 0
Time Zone Auto
DST Off --:--
Change Settings Scan Again
TV Setup Complete!
Your TV is now ready to use.
Ok
2014-03-05 4:40:56