Test Tone
Use test tone to check the speaker connection status or level.
3-8
To Automatically Output Test Tone
REMOTE CONTROL
Press TEST TONE button.
Test signal will be automatically output as follows; F.L
•
S.L
S.W.
During test tone output, press ... † button to adjust the speaker output level
•
from -10 to +10 dB by 1 step.
To Stop Test Tone
Press TEST TONE button again.
•
MAIN UNIT
1
Press SETUP button.
"SETUP MODE" appears on the display and enters into Setup Mode.
•
2
Press FUNCTION button 5 times.
"TEST-T AUTO" appears in the display.
•
3
Press SURROUND button.
Test signal will be automatically output as follows; F.L
•
S.R
S.L
S.W .
During test signal output, press SELECT (
•
output level from -10 to +10 dB by 1 step.
To Stop Test Tone
Press SETUP button 1 time.
"SETUP MODE OFF" appears on the display and test tone stops.
•
√
CEN
√
CEN
) button to adjust the speaker
,
Samsung Electronics
F.R
S.R
F.R