ITEMS INCLUDED AND TECHNICAL DATA ITEMS INCLUDED 1 × anti-mineral pad Printed quick start guide BONECO S250 1 × CalcOff ® TECHNICAL DATA Mains voltage 220 V / 50 Hz Power consumption 145W/285 W Humidity output 6.8 liters (1.8 gal)
PUT TING INTO OPER ATION Place the BONECO S250 on a stable surface. Fill the water tank with cold tap water. Plug the power cord into a power outlet. Switch on the BONECO S250 by pressing the Control the steam output using the button.
Page 6
DISPL AY AND HANDLING Overview of all indicators on the display Symbol Meaning Button Function Humidity On/Off, starts cleaning function Display shows the current humidity Controls steam output Display shows the set humidity Sets the desired humidity High (H) or low (L) steam output Note: Refill the water Note: Cleaning required...
Page 7
HANDLING CONTROLLING HUMIDITY REGULATING OUTPUT The BONECO S250 is equipped with a hygrostat that con- The performance of the BONECO S250 is regulated in tinuously monitors the humidity in the room and regulates two levels. the unit's operation. The adjustable range is between 30% and 70%.
Page 8
SAFETY INSTRUCTIONS CLEANING THE HOUSING REPLACING THE ANTI-MINERAL PAD Always unplug the BONECO S250 before you start In most cases, a dry cloth can be used for cleaning. If The anti-mineral pad absorbs lime in the water so that it...
3 seconds to start the clean- Although the anti-mineral pad absorbs most of the lime Switch off the BONECO S250 and let it cool down for ing. in the water, the heating plate of the BONECO S250 ex- 1 hour.
Page 10
BONECO is a registered trademark of BONECO AG, Switzerland...
Need help?
Do you have a question about the S250 and is the answer not in the manual?
Questions and answers