Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Equinox Systems Verti Jet
Summary of Contents for Equinox Systems Verti Jet
- Page 1 Verti Jet User Manual Order code: EQLED356...
-
Page 2: Safety Advice
• This fixture is for professional use only - it is not designed for or is 240V AC, 50Hz. suitable for household use. The product must be installed by a • Make sure that the power cable is never crimped or qualified technician in accordance with local territory regulations. The safety of the installation is the responsibility of the installer. damaged. Check the equipment and the power cable The fixture presents risks of severe injury or death due to fire periodically. hazards, electric shock and falls. • If the equipment is dropped or damaged, disconnect the mains • Warning! Risk Group 2 LED product according to EN 62471. Do power supply immediately and have a qualified engineer inspect not view the light output with optical instruments or any device the equipment before operating again. that may concentrate the beam. • WARRANTY: One year from date of purchase. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. Before filling the unit disconnect the mains. Never fill with hot liquids. Only use high quality, water based smoke fluid recommended by the manufacturer. Other smoke fluids may cause clogging and void the guarantee. Always make sure there is sufficient smoke fluid in the tank. Operating this smoke machine without smoke fluid will cause damage to the pump as well as over heating of the heater. Operate the unit only after you have familiarised yourself with its functions. Do not permit operation by persons not qualified for operating the unit and always drain the tank and use the original packaging if the unit is to be transported. www.prolight.co.uk Verti Jet User Manual... - Page 3 Order code EQLED356 430mm 360mm 01 - Smoke aperture 02 - LED output 03 - 3-Pin XLR input/output 04 - 5-Pin XLR input/output 05 - Fluid tank 06 - LED display 07 - Menu buttons 08 - Power on/off switch 09 - IEC power input 10 - Fuse F8A 250V 11 - Manual switch 12 - Remote control sensor 13 - Carry handle In the box: 1 x fixture, 1 x wireless remote control, 1 x power cable & 1 x user manual www.prolight.co.uk Verti Jet User Manual...
-
Page 4: Operation
(decoration articles etc) within a minimum distance of 1m DANGER TO LIFE! Disconnect from the mains before starting maintenance Only use quality smoke fluids recommended by your dealer. You must not use substances which are classified as ‘DANGEROUS WORKING MATERIALS’ or ‘FLAMMABLE FLUIDS’. www.prolight.co.uk Verti Jet User Manual... - Page 5 C o L o Set LED work confirm ‘ENTER’ C o 3 Blue program confirm ‘ENTER’ C o 4 Red and green confirm ‘ENTER’ C o 5 Red and blue confirm ‘ENTER’ C o 6 Green and blue confirm ‘ENTER’ C o 7 Red, green and blue confirm Note: The colour will show in the smoke output once set. www.prolight.co.uk Verti Jet User Manual...
- Page 6 Set DMX Address confirm confirm DMX address 5 0 6 Note: This unit is designed so the DMX control takes priority. When a DMX controller is connected the screen will display the current address code and wireless remote control function and the manual button function will both be disabled. Channel Value Function 000-009 Smoke off 010-255 Smoke output (full on) 000-255 Master dimmer (0-100%) 000-020 No function 021-127 Static colour 128-255 Auto (slow to fast) 000-009 Strobe off 010-255 Strobe (slow to fast) 000-255 Red dimmer (0-100%) 000-255 Green dimmer (0-100%) 000-255 Blue dimmer (0-100%) www.prolight.co.uk Verti Jet User Manual...
-
Page 7: Troubleshooting
Operating instructions Troubleshooting: When the display shows a flashing this means the machine has run out of fluid and has stopped working to protect the pump. When this happens please do the following: Power off the unit and disconnect from mains power supply. Refill the fluid tank. Reconnect the mains power supply and power on the unit The unit can now be operated again after it has finished heating up again, the screen should not show anymore. If the continues to flash, please contact your dealer. In order to keep the unit working efficiently make sure the fluid level is topped up and doesn’t run out. www.prolight.co.uk Verti Jet User Manual... - Page 8 Step 1: Open the fuse holder on the rear panel with a suitable screwdriver. Step 2: Remove the old fuse from the fuse holder. Step 3: Install the new fuse in the fuse holder. (Replacement fuses should be of the same value as originally supplied) Step 4: Replace the fuse holder in the housing. Should you need any spare parts, only use genuine parts. If defective, please dispose of the unusable unit in accordance with the current legal regulations. Should you have any further questions, please contact your dealer. www.prolight.co.uk Verti Jet User Manual...
-
Page 9: Dmx Setup
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m Note: DMX cable must be daisy chained and cannot be split. www.prolight.co.uk Verti Jet User Manual... -
Page 10: Line Termination
5-pin XLR (male) 3-pin XLR (female) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk Verti Jet User Manual... -
Page 11: Weee Notice
WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk Verti Jet User Manual... - Page 12 Verti Jet User Manual...
Need help?
Do you have a question about the Verti Jet and is the answer not in the manual?
Questions and answers