RH-4_FCC_2003-4-16.fm Page 5 Friday, April 18, 2003 4:34 PM
2. Getting started
Remove and mount the
back cover
There are two different back covers
in your sales package. One is with
the stylus holder to carry the stylus,
the other is flat. You can choose
which one to use. Below are
instructions on how to remove and
mount the two kinds of back covers.
For cover with stylus
holder
1. Slide the stylus toward the top
end of the phone to remove (1).
2. Press down the back cover
release button with the stylus
(2), and slide the back cover
slightly toward the bottom end
of the phone (3). Lift the back
cover to remove (4).
3. Position the back cover as
shown in the illustration (5).
Slide the back cover toward the
top end of the phone to lock (6).
4. Slide the stylus toward the
bottom end of the phone until it
reaches the end of the slot (7).
For flat cover
1. Press the back cover release
button (1), slide the back cover
slightly toward the bottom end
of the phone (2), and lift the
back cover to remove.
5