Trail Tech ENDURANCE II Manual

BUTTON 1
BUTTON 2
Setting Menu:
To enter Endurance II set up
menu, press and hold buttons 1,2,
& 3 for three seconds. Make sure
to press and hold all 3 buttons at
the same time!
Button Overview:
Button 1: Increment (Up)
Button 2: Decrement (Down)
Button 3: Next Setting
Set Distance:
Select desired unit setting using
button 1 or 2. (KM/H or MH)
Set Tire Size:
Choose your tire size using button
1 or 2. Note: To determine proper
tire size see: "Taking Wheel
Measurment" section on back
page.
Set Clock Format:
Select desired clock format using
button 1 or 2. (12HR or 24HR)
Set Time Of Day:
Set your clock to desired time of
day using button 1 or 2.
Select Maintenance
Reminder Method:
Select desired maintenance
method using button 1 or 2.
ODO = Odometer, based off
mileage.
ART = Accumulated Ride Time,
based off hours.
Select Maintenance
Reminder Interval:
Set your maintenance value to
desired time or mileage duration.
Note: This value will represent
either accumulated hours until
maintenance or accumulated
mileage until maintenance, based
off previous menu selection (ART
or ODO.)
BUTTON 3
Quick Resets:
Screen 1: DST
• Press and hold buttons 1 & 2 for three
seconds to reset DST.
• Press and hold button 3 to enter
DST adjustment. Use buttons 1 & 2 to
increment and decrement your DST.
Press button 3 to return to main screen.
Screen 2: DST2
• Press and hold buttons 1 & 2 for three
seconds to reset DST2, Ride Time, &
AVG Speed.
• Press and hold button 3 to enter
DST2 adjustment. Use buttons 1 & 2 to
increment and decrement your DST2.
Press button 3 to return to main screen.
Screen 3: ODO
• Press and hold buttons 1 & 2 to reset
Max Speed.
• To view time remaining until service
maintenance interval icon is activated
press and hold Button 3 for three
seconds.
• When the maintenance icon
illuminated, press and hold button 3 for
three seconds to enter maintenance
interval screen and then to reset
maintenance interval press and hold
button 1 & 2 for three seconds.
Notes:
1. Wakes on external power from bike.
2. Wakes on wheel movement.
3. Wakes on button press.
4. On external power backlight shuts off
after 90 seconds of inactivity.
5. After 180 seconds of inactivity only
clock will be displayed.
is