Hauppauge WinTV-HVR-930C HD Quick Installation Manual For Windows

WinTV-HVR-930C HD
WinTV-HVR-935 HD
Quick Installation Guide for Windows
Hauppauge Computer Works, Ltd
Crown House, Home Gardens, Dartford,
Kent DA1 1DZ,
United Kingdom
tel: (+44) 203 405 1717
Support: www.hauppauge.co.uk/contact
www.hauppauge.co.uk
1. Contents of the Package
WinTV-HVR-930C HD or
A
WinTV-HVR-935 HD Stick
USB Extension Cable
B
DVB-T Antenna
C
(only some models)
For the exact contents please refer to the packaging description on the box.
* Please keep the serial number in a safe place. It is required for future installations.
4. Software Installation
Please note:
- This step requires that the WinTV stick is connected to the USB port.
- It is recommended to disable your antivirus software during installation.
- An Internet connection is required for software activation.
If a CD ROM is included, run Setup
from the CD ROM.
If a CD ROM is not included, open
your web browser and enter the
download link from the WinTV v8
Download Document into the ad-
dress bar. Or alternate, visit
www.hauppauge.co.uk ,
click on "SUPPORT", then "WinTV
v8".
Download the WinTV8 Setup file to
your computer.
Then run the downloaded file, for ex-
ample wintv8setup_34180.exe (the
version number may vary).
Select your language and click
"Next". Follow the instructions on
your screen.
First the device driver for the WinTV
stick will be installed.
In the "Activation Required" window,
click on the button "Enter Serial
Number" and enter the serial num-
ber from the WinTV v8 Download
Document (or CD sleeve).
After successful activation, the
WinTV application will be installed. It
is recommended to use the default
directories for the program and data
files.
After the installation, you will find a
'WinTV 8' icon on your desktop and
a "Hauppauge WinTV" folder in the
Windows Start menu.
Hauppauge Digital Asia Pte Ltd
1093 Lower Delta Road #04-05
Tiong Bahru Industrial Estate
Singapore 169204
tel: +65 62769163
fax: +65 62769167
email: sales@hauppauge.com.sg
tech support: support@hauppauge.com.sg
www.hauppauge.com.sg
Remote Control with CR2016
D
battery (only some models)
A/V Input Cable (some models)
E
WinTV v8 Download Document
F
with Serial Number*
- or -
Installation CD ROM with
Serial Number* on the Sleeve
1
3
English
1. Turn on your PC or Laptop and wait until Windows has completely started.
2. Plug the WinTV-HVR Stick into a USB 2.0 or USB 3.0 port using the supplied USB
extension cable. This is to reduce mechanical load to the USB port, and also adja-
cent USB ports can still be used.
N ote: Due to power and bandwidth requirements, we do not recommend con-
necting the unit into an external USB hub.
Cable TV
On a cable TV feed, the WinTV-HVR-930C/935 HD can receive digital TV/radio pro-
grams (DVB-C) and also analog TV programs (PAL).
Connect the TV output on the cable TV socket to the TV input on the WinTV-HVR
Stick, using a high quality antenna cable (not supplied).
Digital Terrestrial TV
WinTV-HVR-930C/935 HD can receive DVB-T broadcasts from an antenna. In addition,
the WinTV-HVR-935 HD can also receive the new DVB-T2 signals.
Connect the supplied antenna, or a suitable roof top antenna to the TV input on the
WinTV-HVR-930C/935 HD.
To receive digital terrestrial TV, you should ensure you are located in an area that sup-
ports Digital Terrestrial TV by visiting one of these websites:
Denmark: www.digi-tv.dk
France: www.csa.fr
Poland: www.emitel.pl
Sweden: www.teracom.se
Singapore: www17.mediacorp.sg/digitaltv
N ote: When using an indoor antenna with built-in amplifier, the power for the
amplifier needs to come from a separate power supply.
Connecting a Video Source
You can connect an external video source using the supplied A/V cable. Connect the
video signal to the yellow RCA plug or the black S-Video plug (4 pin) on the A/V cable.
Connect the audio signal to the white and red plugs on the A/V cable. Connect the
other end of the A/V cable to the micro USB connector on the side of the WinTV-HVR
stick.
5. Run the WinTV pplication and Scan for Channels
To run the WinTV v8 appli-
cation, double-click on
the WinTV 8 icon on your
Desktop. On the first start
of the application, the Device Setup
Wizard will appear.
Set the checkmark for the type of TV
signal that is connected to the
WinTV-HVR stick.
Digital Terrestrial TV
For digital terrestrial TV over antenna
set the checkmark on "Digital Ter-
restrial TV (DVB-T)".
Cable TV
If you have connected the WinTV-
HVR stick to a cable TV feed, set the
checkmark on "Digital Cable (DVB-
C)". You can also set the checkmark
on Analog TV to scan for analog TV
channels.
External Video Source
If you have connected an external
video source using the supplied A/V
Input Cable, select "External Inputs
(Composite/S-Video)".
Click on the Next Button to continue.
Select your Country and Region. If
your region is not listed, choose the
default selection for the region.
Click Next to start scanning for chan-
nels.
Channels will be found and listed
during the scan.
Once this is complete, click Next to fin-
ish.
Rerun Channel Scan
To scan for channels at a later time, in
the main WinTV window click on the
gear icon , then select the "Devices"
tab, click on the WinTV device entry
and click on "Tuner Setup".
2. Installing the WinTV Stick
3. Connecting the TV Signal
Finland: www.digitv.fi
Germany: www.ueberallfernsehen.de
United Kingdom: www.dtg.org.uk
Switzerland: www.broadcast.ch
2
4