ActionTec ScreenBeam Mini2 Quick Start Manual

Wireless display receiver

Connect the ScreenBeam

Continuum Edition to an HDMI

input of your display

Connect the USB cable to the power

Switch source on your display to

HDMI until the "Ready to Connect"

screen appears

For connection instructions,

open the web browser on the

device you wish to connect,

enter

actiontec.com/setupsb

and follow the steps

Quick Start Guide

Mini2

HDMI

(Optional)

keyboard/mouse's

wireless receiver

(wireless keyboard, mouse, and

its receiver are not included)

Display

Power

USB

Table of Contents

Need help?

Do you have a question about the ScreenBeam Mini2 and is the answer not in the manual?

Page 1: Quick Start Guide
HDMI until the “Ready to Connect” Power screen appears (Optional) keyboard/mouse’s For connection instructions, wireless receiver open the web browser on the device you wish to connect, enter actiontec.com/setupsb and follow the steps (wireless keyboard, mouse, and its receiver are not included)
Page 2 Taskbar to turn on or off for the Tablet mode. © 2016 Actiontec Electronics, Inc. ScreenBeam and the Actiontec logo are registered trademarks or trademarks of Actiontec Electronics, Inc., in the U.S. or other countries. All other names are properties of their respective owners. P/N: 0530-0769-000...