Connect To The Nas Device On A Zero Client - cloudpoint Synology Installation And User Instructions

17) Open System
as needed.
18) Open System
Recovery, Beep Control, Fan Speed mode, Led Brightness Control.
19) Open File sharing
Password Settings
scroll down to User home
bin.
20) Open File Sharing
(1) Enter the user name and password (we recommend that NAS
password should be different from vCloudPoint User password),
Next step.
(2) System default group: leave as default, Next step.
(3) Assign shared folder permissions: leave as default, Next step.
(4) User quotas setting: set it according to the actual use of each
user and
(5) Assign application permission: leave as default, Next step.
(6) User speed limit: leave as default Next step.
(7) Check the new user settings, confirm then Apply.
21) Select the user just created, select user
enter the user name and password, and copy all the user
configuration.
22) NAS installation completed.
 Connect to the NAS device on a zero client:
23) Open the File Explorer, enter the NAS device's IP address :
xxx.xxx.xxx.xxx
24) Enter the assigned NAS user name and password, press OK.
25) Right-click the home folder, select Map Network Drive, click Finish.
www.vcloudpoint.com
theme style, set page landing page title and theme

Hardware & Power ...you can customize Power

User Advanced :
 
apply password strength rule,

Enable User home services and Recycle

User accounts, create Users.

can set to limit or unlimited, Next step.
.
Create▼

- 3 -
Copy User, simply

\\