Download Print this page
Klein Tools ET300 Instruction Manual

Klein Tools ET300 Instruction Manual

Digital circuit breaker finder
Hide thumbs Also See for ET300:

Advertisement

Quick Links

Instruction Manual
Digital Circuit
Breaker Finder
Apo
ENGLISH
• Fully automatic
• Flashing arrow
indicator For
easy identiFication
• 90 – 120V ac
operation
• microprocessor
controlled For
more accurate
readings
ET300
Digital Circuit Breaker
TRANSMITTER
Visit us at www.TestEquipmentDepot.com
ET300
Micro-Processor
Controlled
RECEIVER
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
english
ET300
instruction manual
general speciFications
operating Voltage:
90 – 120V AC
operating Frequency:
50 – 60Hz
tracking distance:
Up to 1000 ft. (305 m)
operating temperature:
32°F – 104°F (0°C – 40°C)
relative humidity:
50%
altitude:
< 6562 ft. (2000 m)
environment:
For indoor use only
• power: 9 volt alkaline battery
auto power off:
Approximately 4 minutes
transmitter dimensions:
2.8" x 1.9" x 1.2" (7.11 x 4.83 x 3.04 cm)
receiver dimensions:
6.0" x 2.0" x 0.9" (15.24 x 5.08 x 2.29 cm)
transmitter weight:
1.6 oz. (45 g)
• receiver weight: 3.2 oz. (91 g)
sensitivity:
Indication at 0.16" (4 mm) distance from a wire
carrying 120V AC.
safety rating:
UL listed
saFety precautions
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• Understand the risks of working around live voltage.
• Turn off power before inspecting, applying, or removing
the transmitter (when using the optional 'Leads Adapter').
• Exercise extreme caution around live, bare wires, especially
in an open breaker panel.
• Consult with an experienced electrician when necessary.
optional accessories
A
light Fixture adapter:
Screw this adapter into an empty light socket.
Make sure the fixture is live. Plug in the
transmitter and follow the instructions
starting at step 4.
B
leads adapter:
Carefully attach leads to the correct wires.
Plug in transmitter to adapter. Follow the
ET300
instructions starting at step 4.
Dig tal C rcu t B eaker
TRANSMITTER
Exercise extreme caution around live wires.
A
B
(Cat. No. 69411)

Advertisement

loading
Need help?

Need help?

Do you have a question about the ET300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Klein Tools ET300

  • Page 1 ET300 ET300 instruction manual Instruction Manual general speciFications Digital Circuit • operating Voltage: 90 – 120V AC Breaker Finder operating Frequency: • 50 – 60Hz tracking distance: • Up to 1000 ft. (305 m) operating temperature: • 32°F – 104°F (0°C – 40°C) ENGLISH relative humidity: •...
  • Page 2 english instructions Identify the wall outlet or fixture for which the breaker must be determined. cleaning Safely check that the outlet or fixture is live. Plug in the transmitter. Its LED will light if it is receiving power. Clean the instrument by using a damp cloth. Do not use abrasive cleaners or solvents.