KingShield T17B-C Installation & Operating Instructions

INSTALLATION /OPERATING
INSTRUCTIONS FOR
7 DAY ELECTRONIC PLUG-IN TIMER
MODEL NUMBER: T17B-C.
Please read these instructions fully before
attempting installation
OPERATING
INSTRUCTIONS
• Timer uses a standard AAA size
non-rechargeable battery to back up the
timer memory function. The battery
allows for programming while the unit
is not plugged in and provides for
memory retention during power failures.
The battery back up will last at least 150
hours.
CURRENT TIME AND
DAY SETTING
1. Press the R button to reset the timer to
its default settings, activate using a
pencil or similar point instrument.
(pressing R will delete all stored
programmes)
2. Press Y to enter function setup.
(Note: If another button is not pressed
within 10 seconds the display will revert
to the normal screen)
3. Use the + or - button to scroll to the
clock icon (flashing) and press Y to
enter the current time setting mode
(hours flashing).
4. If you keep the + or - buttons pressed
for more than 3 seconds, the display
will enter fast scroll mode.
5. Use the + or - button to adjust the
hours and press Y to confirm, minutes
will flash.
6. Use the + or - button to adjust the
minutes and press Y to confirm, day will
flash.
7. Use the + or - button to adjust the day
and press N to exit.
PROGRAMMING THE
SWITCHING TIMES
1. There are 24 ON/OFF programmes
available
2. Press the Y button twice to enter the
programme setting mode.
(Note: If another button is not pressed
within 10 seconds the display will revert
to the normal screen)
3. Default is programme 01 ON, this can
be changed if required by pressing the +
or - button to scroll through the 24
ON/OFF programmes as required,
pressing the Y will confirm the
programme.
.
4. Press the Y button to confirm
programme 01 ON, hours will flash.
5. Use the + or - button to adjust the
hours and press Y to confirm, minutes
will flash.
6. Use the + or - button to adjust the
minutes and press Y to confirm, days
will flash.
7. Apart from individual days of the week,
the following day combinations of
multiple day blocks can be selected by
pressing the + or - buttons.
• Monday to Sunday
• Monday to Friday
• Saturday & Sunday
• Monday to Saturday
• Monday + Wednesday + Friday
• Tuesday + Thursday + Saturday
• Monday + Tuesday + Wednesday
• Thursday + Friday + Saturday
8. Select day or day block as required and
press the Y button to confirm.
9. Press the + button, this will select the
programme 01 OFF, press Y to
confirm.
10. Follow 4 to 7 above to set the 01 OFF
programme.(day or day block must be
the same as programme ON)
11. If no more programmes are required,
press the N button to exit.
12. If more programmes are required,
follow 3 above.
13. To cancel a programme once set,
press and hold the N button for more
than 3 seconds when the desired
programme number is flashing, i.e. to
cancel programme 01 ON, press the Y
button twice and hold the N button
down for more than 3 seconds to
delete. Pressing the + button again will
select the 01 OFF.
14. Repeat 13 to delete 01 OFF. This
procedure can be repeated to delete
any of the 24 programmes.
TIMER COUNTDOWN
FUNCTION
1. Timer has a 100 hour countdown
feature i.e. The timer can be set to any
period from 1 minute to 100 hours and
will countdown in the ON state and turn
OFF at the end of the countdown period.
2. Press the Y button then use the + or -
button to select the "down" icon on the
right hand side of the display, press Y
again to enter the countdown mode.
3. Use the + or - button to adjust the hours
and press Y to confirm, minutes will
flash.
4. Use the + or - button to adjust the
minutes and press Y to confirm and
complete the countdown time setting.