ThermoWorks ThermaQ WiFi Quick Start Manual

INSTRUMENT RECORD CARD
Model
ThermaQ WiFi
Serial no. _____________________________________
Calibrated by __________________ Date ____________
This instrument has been checked or calibrated against
reference instrument(s) calibrated by a UKAS Accredited
Calibration Laboratory, which are traceable, via International
Agreement, to all major National Standards, including NIST.
WARNING
IPA and other solvents may cause damage to the case and
screen of this instrument.
Environmental conditions may affect the signal
strength.
GUARANTEE
The ThermaQ WiFi carries a two-year instrument guarantee.
ThermoWorks probes carry a six-month guarantee.
BATTERY CHANGING
You will need a flat-headed screwdriver (provided in box).
1. Place the instrument display down on a solid surface.
2. Unscrew and remove the battery cover.
3. Remove batteries (top one first).
4. Fit new batteries, noting the polarities marked on the
plastic.
5. Replace battery cover, then tighten battery screw.
ThermaQ will attempt to reconnect to saved Wi-Fi and
continue transmitting.
Please note: Due to regular app updates, please visit
Google Play Store or Apple App Store to ensure you have
the latest version.
For warranty, service, and technical assistance,
please contact ThermoWorks' Technical Support at (801)
756-7705 or email at techsupport@thermoworks.com.
Ph: 801-756-7705 Fax: 801-756-8948
www.thermoworks.com
P-17-003-02-b
Order Code
299-121
32°F (0°C ) 212°F ( 100°C )
ThermoWorks, Inc.
Utah, U.S.A.
547-911 / 28.09.17
ThermaQ
®
Quick Start Guide
WiFi