Related Manuals for Robomow RS635 Pro S
Summary of Contents for Robomow RS635 Pro S
-
Page 1: User Guide
User Guide See how to install Original Operating Instructions Robotic Mower RS635 Pro S, RS625 Pro, RS615 Pro, RS615u... - Page 2 I’m Robomow, nice to meet you. Your safety is important to us - Please review this Manual carefully for all safety warnings and take extra caution to keep both children and pets off the lawn when Robomow is in operation.
- Page 3 Safety first..... Installation....Quick reference....
-
Page 4: Safety First
Safety first IMPORTANT! READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE Warning decal definitions Safety warnings & precautions Safety features Do not allow children to use or operate the mower. Children must be supervised at all times. - Page 5 Warning decal definitions 1. This is a dangerous power tool. Exercise care when operating and follow all safety instructions and warnings. 2. Read the Safety Manual carefully before operating your mower. 3. Be careful of thrown objects during operation. 4. Keep a safe distance from the mower while it is operating. Keep people, especially children, pets and bystanders away from the area where the mower is operating.
- Page 6 Safety warnings & precautions A. Before you begin 1. Read this Safety Manual carefully before operating the mower to become familiar with its controls and proper use. 2. Never allow children, persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge or people unfamiliar with these instructions to use the machine.
- Page 7 C. Operation IMPORTANT SAFETY WARNING! Do not leave the mower to operate unattended if you know that there are pets, children or people in the vicinity. Never mow while people (especially children) or pets are nearby. 1. Do not operate the mower if any safety feature or any part is damaged, worn or inoperable.
- Page 8 D. Transportation Within the working area: 1. Press the STOP button to stop the mower. 2. Use the Remote Control. (available as an accessory or via the mobile App) to drive it from one place to another. 3. In case of different ground height level, switch off the Safety Switch, and carry the mower by its carrying...
- Page 9 E. Using the remote control (manual mowing) 1. Mow only in daylight or in good artificial light, and avoid operating on wet grass. 2. Do not operate the mower barefoot or wearing open sandals. Always wear substantial footwear and long trousers;...
- Page 10 G. Maintenance and special instructions 1. Always switch off the Safety Switch before clearing blockage/checking/cleaning/working on the mower, or after striking a foreign object to inspect the machine for damage. Never attempt to service or adjust the mower while it is in operation. 2.
- Page 11 H. Product end of use 1. The mower and its accessories should be collected separately at the end of their life to prevent waste electrical and electronic equipment from ending up in landfill sites, and to protect and improve the quality of the environment. 2.
- Page 12 Safety features WARNING! Your mower is equipped with numerous built-in safety features. However, the mower is a hazardous device with a sharp blade, which can cause major injury to anyone who comes in contact with it. Therefore, it is absolutely forbidden to be on the lawn while the mower is working.
- Page 13 C. Lift Sensor If the mower is raised from the ground during the blade’s operation, the blade will stop rotating immediately. D. Tilt Sensor If the mower is tilted up towards a vertical position, the blade will stop immediately. E. Obstruction Sensor Your mower detects interfering obstacles in its way during operation.
- Page 14 Let’s get started. Can’t wait to mow your lawn.
- Page 15 Welcome to a friendly home Congratulations on on your purchase! You are just a few steps away from meeting your best team player. Very soon you will come to count on your new friend to do a perfect job. It will independently depart from its base on predetermined days and times, mow your lawn and return to base for charging.
- Page 16 In addition, it follows the perimeter wire, when it mows the edges of your lawn to give it a perfect finish. Good-looking lawns are achieved by consistent mowing, which is exactly what a robotic mower provides. After following the clear installation instructions, you will be ready to enjoy your free time, while your new friend looks after your lawn.
- Page 17 So where are we headed? Correct installation of your mower will ensure maximum results. This is what it takes to prepare it to do a perfect job for you: Know Your Lawn What’s your lawn type? Ready, Set, Test Get Started Setup and trial run Choose Base Station location Lay the Wire...
- Page 18 What’s in the Box The product Extension Cable Your new Robotic Mower 20 m (65 ft) low voltage cable to connect the mower to the Power Supply unit Base Station Perimeter Wire This is where the mower Marks the working area recharges itself for the mower USER...
- Page 19 Blade Tool For safe removal of the blades Base Station Stakes (x6) For affixing the Base Spare Plot Connector Station to the ground For connecting the Perimeter Wire to the Base Station Wire Connectors For splicing the Perimeter Wire in case of a cut Wire Pegs For securing the wire to the ground...
- Page 20 Know Your Lawn Understanding your lawn will save you unnecessary mistakes and make the installation process easier and more straight-forward. You can also skip some later sections in this manual that are not relevant to your lawn type. So, what does your lawn look like? Type A Main Zone only Your lawn area is one...
- Page 21 Type C Main Zone + Separated Zone Your lawn consists of two Main Zone or more zones that are not connected (separated by a fence, sidewalk, pathway or other obstacle). The mower cannot drive between these zones. Separated Zone Type D Main Zone + Sub Zone + Separated Zone Some...
- Page 22 Started Choose locations for the Base Station & Power Supply unit The Base Station is where your mower recharges, and where the perimeter wire starts and ends. In this installation step, you are going to determine a proper location for the Base Station. The Base Station will be installed at a later stage, after the Perimeter Wire is in place.
- Page 23 Consideration B A min. of 3 m [10 ft] of straight wire in front of the base and a min. of 30 cm (1 ft) behind the base to allow smooth docking Consideration C In a flat and shady spot •...
- Page 24 the Wire Lay the perimeter wire (“virtual boundary”), which defines the working area for the mower. Now you’re ready to install the Perimeter Wire. Let’s take it step by step. • Have your mower’s package nearby. • Be sure to cut your grass with your old mower one last time before you start wiring.
- Page 25 Hard Obstacles Hard obstacles are vertical, rigid and higher than 15 cm (6 in), such as trees or telephone poles. If a Hard Obstacle has a diameter under 10 cm (4 in), it must be protected by a If the diameter is Perimeter Island.
- Page 26 A. Make a Good Start Before you begin, walk along the edge of your lawn and plan how to set up the Perimeter Wire. Take note of all obstacles and slopes. Pull out approx. 30 cm (1 ft) of wire through the hole in the spool’s plastic covering and peg the beginning of the wire to the ground where you intend to install your Base Station.
- Page 27 B. Maintain Proper Distance The Perimeter Wire is secured to the ground by the pegs supplied with the product. Use the RoboRuler to determine the distances you should leave between the Perimeter Wire and the lawn’s edge and obstacles. • Insert pegs every few meters/feet and at corners. At this early stage, set a minimal number of pegs.
- Page 28 • It is not necessary to bury the Perimeter Wire, though you may do so, up to 5 cm (2 in) deep. • Burying the wire along exposed areas, such as pavements, TIPS is usually recommended. • If additional Perimeter Wire is required in order to complete the setup, you can extend it using the waterproof Wire Connectors provided (see section 5-G “Splicing the Perimeter Wire”).
- Page 29 D. Protect Soft Obstacles Objects such as flower beds, ponds, or small trees must be protected by setting Perimeter Islands. Perimeter Wire position Perimeter Wire If the distance between an island and the Keep min. 1.5 m (5 ft) between perimeter wire is lower than 1.5 m (5 ft), islands;...
- Page 30 Recall Your Lawn Type Main Zone Main Zone Main Zone Main Zone Separ. Sub Zone Separated Zone Sub Zone Zone Type A Type B Type C Type D Main Zone only Main Zone + Main Zone + Main Zone + Sub Zone Separated Zone Sub Zone +...
- Page 31 A helpful video is available online • If a Narrow Pass is shorter than 2 m [7 ft], set up only one square Perimeter Island in the passage • Take care to wire Narrow Passes correctly to ensure that the TIPS mower doesn’t cross into different zones spontaneously while mowing...
- Page 32 F. How to Wire a Separated Zone Type C / Type D Don’t have a Separated Zone? Skip this section! If your Separated Zone is larger than 120 m /1291 ft (200 m /2150 ft for models over 3000 m /30000 ft ), your mower won’t be able to finish it in a single operation.
- Page 33 OPTION 2 Wire the Zone separately and connect it to a Perimeter Switch (optional accessory). Perimeter Switch Main Zone Power Supply unit and Base Station...
- Page 34 G. Complete Wire Setup Once the Perimeter Wire has been laid completely, the two ends of the wire that meet at the Base Station should be joined together. • Use the same peg to fasten both tail ends of the wire to the ground •...
- Page 35 Strip back 5 mm (0.2 in) of insulation from the wire ends, insert the twisted wire into the connector and secure it using a small flat screwdriver.
- Page 36 Power Install and connect the Base Station and Power Supply A. Install and Connect the Base Station Place the Base Station in its planned location. Remove the Base Station’s head from the Base: A. Pull the lever upward. Push B. Push the Base Station’s head from the front side in the direction marked.
- Page 37 Attach the Perimeter Wire connector to point A on the Base Station’s head. Attach the 20 m (65 ft) extension cable to point B on the Base Station’s head. Slide the Base Station’s head back into place on the sliders (C). Make sure it is inserted properly all the way through.
- Page 38 B. Connect the Power Supply unit Consider the following in order to select a proper location for the Power Power Supply unit: Supply unit Base • Select a suitable location Station near a power outlet • Position it outside the lawn perimeter 20 m (65 ft) •...
- Page 39 Connect the Power Supply unit to a regular power outlet. Now you should see the LED indication on the Base Station blinking green (if the mower is outside), or steady green (if the mower is inside the Base Station). LED indication Caution The Extension Cable from the Power Supply to the Base Station should be securely fastened to the ground! It...
- Page 40 Ready, Set, Test Prepare your mower and give it a test drive. Congratulations! Now you are ready to give it a whirl. WHAT YOU’LL NEED: • The mower • Remaining Pegs • Remaining Base Station stakes ... A glass of champagne (or equivalent) A.
- Page 41 Insert the fuse. Fuse Caution Make sure the fuse holder is fully screwed in. Switch on the Safety Switch. B. Set Basic Settings Follow the instructions on the screen for a quick initial configuration. Caution Your mower has enough power to complete the configuration.
- Page 42 Set Time Set Time : 45 To restart the setup at any time, press and TIPS hold STOP + down arrow together for at least 4 seconds. C. Test Base Station Position Place the mower on the lawn, 3 m (10 ft) in front of the entrance to the Base Station, facing the Perimeter Wire, and press GO to start the test.
- Page 43 The mower will drive to the Base Station and enter it. Searching Base Next, it will drive out and wait in front of the Base Station and tell you to Peg Base. Insert the remaining four stakes into the Base Station. Press GO. Base •...
- Page 44 D. Test Perimeter Wire Main Zone Area? 200-300 m Enter the size of your Main Zone area. When you see the message “Test wire position,” it means your mower is ready to test. Press GO. It will start driving. Test Wire Position Walk alongside as the mower tours the perimeter.
- Page 45 F. Finish Installing the Perimeter Wire Insert the remaining pegs along the Perimeter Wire, approx. 1 m (3.3 ft) apart. Hammer the extension cable into the ground so it’s not a tripping hazard. G. Charge your mower Place your mower on the Base Station and let it fully charge before its first mow (up to 24 hours).
- Page 46 A. Are there any Separated Zones? For lawns that have completely noncontiguous Separated Zones, the area of these zones needs to be programmed separately. Zones Lawn Zones Options Sub Zone Zones A Area Separated Zone 200 - 300 m B. Splicing the Perimeter Wire (as needed) •...
- Page 47 Well Done! Now relax, and let your mower do the work.
- Page 48 Knowing your mower Menu structure Automatic operation Manual operation Features - how to Periodic maintenance Troubleshooting FAQs...
- Page 49 Knowing your mower In order to fully enjoy your mower, learn about its different parts and messages. Understanding how it works and “interacts” will lead to its smooth and easy operation. External Parts Operating Panel STOP Button / Operating Light Carrying Handle Touch Sensitive...
- Page 50 Under the Hood Parts Mowing Height Indicator Cover Door Mowing Height Adjustment Knob Safety Switch Fuse Storage Operation Panel...
-
Page 51: Lcd Display
Operation Panel Go button is used LCD Display window to Select a menu option or confirm a Back button is used to displayed message. cancel a selection or go one Scroll arrows for step back in the menu. menu selection LCD display Current Day Anti-theft is... - Page 52 Base Station LED indication LED indication Indication Meaning Steady green Perimeter wire signal is OK; the mower is inside the base Blinking green Perimeter wire signal is OK; the mower is outside the base Blinking red fast Perimeter wire is damaged or disconnected Blinking red slow Poor perimeter wire connection or...
-
Page 53: Lawn Options
Menu structure For a full description of all menu items, please refer to our online Help Center. Navigate the menus by using the arrows and make a selection by pressing Go. Lawn Options Configure lawn and mowing parameters Inactive Time Set mowing-free times Mowing Extent Set how often to mow... -
Page 54: Mower Options
Mower Options Configure user preferences Child Lock Lock the keypad to prevent accidental press Anti - Theft PIN Code protection and alarm in case of theft Rain Sensor Automatically halt operation in rain/humid weather RoboHome RoboHome accessory on/off RoboHome Time and Date Set date &... - Page 55 Automatic operation Learn how to configure automatic operation and manually bypass/override it when needed • The Area size setting automatically determines the required mowing time for your lawn - the duration of a “Mowing Cycle” • The mower usually performs several consecutive mowing operations until it completes a full Mowing Cycle •...
- Page 56 Scroll using the arrows to select “Mowing Extent” Lawn from the Lawn Option Options Menu Mowing Hours All Zones Mowing Frequency Mowing Frequency By Zone Medium Scroll to select Scroll to select “All Scroll to change mowing Zones”/”By Zone”. If “By frequency.
- Page 57 To set specific “mowing free” days and hours: Scroll using the arrows to select “Inactive Lawn Time” from the Lawn Option menu. Options Hours 1 - On Hours 1 - Hours 2 - Off 23:00 - 06:00 Scroll to select between 1st or 2nd Scroll to toggle the inactive window time slot and press Go.
-
Page 58: Adjusting The Mowing Height
Manual operation Manual Operation is used when you want to start a mowing operation, regardless of the mowing schedule. Manual Operation with or without edging To initiate Manual Operation: Zone Zone Main Scroll to the zone you want Press Go. Scroll to the operation mode the mower to mow. - Page 59 Child Lock This feature is turned Off by default. To turn this feature on: Child Lock Mower Options Scroll using the arrows to Press Go. Scroll to select On/Off. select “Child Lock” from Press Go. the Mower Option Menu To temporarily release keys locked: Press Up arrow, and then Back.
- Page 60 Periodic maintenance WARNING Severe injury and damage hazard! Always turn the Safety Switch off before lifting the mower. Blades are very sharp. They can cause severe cuts or lacerations. Always wear heavy work gloves when working with or around the blades. NEVER use a damaged or broken blade.
-
Page 61: Troubleshooting
Troubleshooting Message Probable Corrective Displayed Cause / Event Action Cross The Perimeter Wire is too Move the wire towards the inner side of close to the edge. the lawn. Outside The lawn slope near the Do not include areas with very steep edge is too big and causes slopes. - Page 62 Frequently asked questions Mower does not dock properly and sometimes misses Base Station’s contacts The entrance to the Base Station is not flat. Fill some ground to flatten the lawn around the Base Station to allow smooth entrance. Make sure the Perimeter Wire is straight and centered all the way under the Base Station.
- Page 63 Learn Your Lawn Contact DOC6011G_EN...
Need help?
Do you have a question about the RS635 Pro S and is the answer not in the manual?
Questions and answers
højdejusteringen falder af sig selv fra f.eks fra 5 cm. til 2 cm. hen over 1 par timer. findes der en manual af denne funktion, så jeg kan se hvad det skyldes.