Suspending any object is potentially dangerous and should only be attempted by individuals who have a thorough knowledge of the techniques and regulations of suspending objects overhead. Electro-Voice strongly recommends that loudspeakers be suspended taking into account all current national, federal, state, and local laws and regulations. It is the responsibility of the installer to ensure all loudspeakers are safely installed in accordance with all such requirements.
Precautions These Electro-Voice loudspeakers were designed for use in an environment with ambient temperatures between -20°C (-4°F) and +50°C (122°F). These Electro-Voice loudspeakers are not rated for continuous outdoor conditions. However, they may be exposed to occasional short-term rain, water, or high humidity.
Introduction EVC loudspeakers from Electro-Voice include five basic models. Three of them are two-way trapezoidal loudspeaker systems that can be used in a wide variety of applications where wide bandwidth, vertical and horizontal directivity control, and high efficiency are required in a compact, cost-effective package.
Page 8
Black is indicated by B at the very end of the model number and white is indicated by W. To find current user documentation visit our product related information at www.electrovoice.com. See also • Technical data, page 21 2018.01 | 01 | F.01U.345.998 Installation manual Electro-Voice...
EV recommends that you take the following steps: Unpack all loudspeakers in the shop. Check for proper model numbers. Check the overall condition of the loudspeakers. Check for continuity at the loudspeaker inputs. Electro-Voice Installation manual 2018.01 | 01 | F.01U.345.998...
To rotate the high-frequency waveguide, do the following: Remove the three screws on each side of the grille. Pop the grille out. Remove the eight screws holding the compression-driver/waveguide assembly. Rotate the waveguide assembly 90°. 2018.01 | 01 | F.01U.345.998 Installation manual Electro-Voice...
Suspending any object is potentially dangerous and should only be attempted by individuals who have a thorough knowledge of the techniques and regulations of suspending objects overhead. Electro-Voice strongly recommends that loudspeakers be suspended taking into account all current national, federal, state, and local laws and regulations. It is the responsibility of the installer to ensure all loudspeakers are safely installed in accordance with all such requirements.
EVC-1122-95PIW EVC-1152-64B EVC-1152-64W EVC-1152-64PIB EVC-1152-64PIW EVC-1152-95B EVC-1152-95W EVC-1152-95PIB EVC-1152-95PIW Table 4.2: EVC Multi Mount Wall Mount Bracket mounting models For more information, see EVC-WB Multi Mount Wall Mount Bracket Installation Instructions (F.01U.349.932). Electro-Voice Installation manual 2018.01 | 01 | F.01U.345.998...
Doing so may result in damage to the enclosure, leading to installation failure, and personal injury. Figure 4.4: Eyebolts installed incorrectly in the sides of an enclosure in order to suspend it from above 2018.01 | 01 | F.01U.345.998 Installation manual Electro-Voice...
Page 15
Excessive tightening of the eyebolt with a wrench, screwdriver or other tool, can result in a system failure and possible injury. Figure 4.5: Fully seated eyebolts with washers, with correct orientation in the plane of pull (Correct; left, Incorrect; right) Electro-Voice Installation manual 2018.01 | 01 | F.01U.345.998...
5:1. When an EV loudspeaker system is installed where local regulations only require a safety factor of 5:1, Electro-Voice insists that the WLL of the loudspeaker rigging never be exceeded and that an 10:1 safety factor be maintained.
Page 17
17. Working load limit for M10 eyebolts and EVC loudspeakers Model WLL Each Point (10:1) WLL Each Speaker (10:1) EVC-1082 30 lb 30 lb EVC-1122-64 or EVC-1122-95 55 lb 55 lb EVC-1122-VI 55 lb 55 lb EVC-1152 65 lb...
Page 18
Rigging strength ratings and safety factors, page 17 • Suspending an EVC loudspeaker using M10 suspension points, page 15 • Rigging strength ratings and safety factors, page 18 • Rigging strength ratings and safety factors, page 17 2018.01 | 01 | F.01U.345.998 Installation manual Electro-Voice...
EVC systems against overdrive at frequencies below their operating range. Failure to do so could damage the low-frequency drivers if the system is subjected to high-level signals below its operating range. Electro-Voice Installation manual 2018.01 | 01 | F.01U.345.998...
Page 20
Dynacord are recommended for use with EVC loudspeakers because they can also implement model-specific processing that optimizes loudspeaker performance. EVC loudspeaker settings can also be implemented in any IRIS-Net compatible digital signal processor. 2018.01 | 01 | F.01U.345.998 Installation manual Electro-Voice...
Dimensions (H x W x D): 492 mm x 248 mm x 277 mm (19.38 in x 9.76 in x 11.01 in) Net weight: 11.2 kg (24.8 lb) Shipping weight: 12.7 kg (28.0 lb) Full-space measurement. EIA RS-426A, tested for eight hours. With recommended preset. Electro-Voice Installation manual 2018.01 | 01 | F.01U.345.998...
Page 22
Vertical off-axis frequency response (down): Vertical off-axis frequency response (up): Beamwidth: Dimensions: 153.6 mm [6.05 in] 276.7 mm [11.01 in] 247.8 mm [9.76 in] 492.2 mm [19.38 in] 228.6 mm [9.00 in] 2018.01 | 01 | F.01U.345.998 Installation manual Electro-Voice...
Dimensions (H x W x D): 492 mm x 248 mm x 277 mm (19.38 in x 9.76 in x 11.01 in) Net weight: 11.2 kg (24.8 lb) Shipping weight: 12.7 kg (28.0 lb) Full-space measurement. EIA RS-426A, tested for eight hours. With recommended preset. Electro-Voice Installation manual 2018.01 | 01 | F.01U.345.998...
Page 24
Vertical off-axis frequency response (down): Vertical off-axis frequency response (up): Beamwidth: Dimensions: 153.6 mm [6.05 in] 276.7 mm [11.01 in] 247.8 mm [9.76 in] 492.2 mm [19.38 in] 228.6 mm [9.00 in] 2018.01 | 01 | F.01U.345.998 Installation manual Electro-Voice...
Dimensions (H x W x D): 616 mm x 395 mm x 401 mm (24.26 in x 15.56 in x 15.77 in) Net weight: 20.3 kg (44.7 lb) Shipping weight: 22.7 kg (50.0 lb) Full-space measurement. EIA RS-426A, tested for eight hours. With recommended preset. Electro-Voice Installation manual 2018.01 | 01 | F.01U.345.998...
Page 28
Vertical off-axis frequency response (down): Vertical off-axis frequency response (up): Beamwidth: Dimensions: 210.6 mm [8.29 in] 400.6 mm [15.77 in] 395.1 mm [15.56 in] 616.3 mm [24.26 in] 304.8 mm [12.00 in] 2018.01 | 01 | F.01U.345.998 Installation manual Electro-Voice...
Dimensions (H x W x D): 684 mm x 433 mm x 451 mm (26.91 in x 17.05 in x 17.77 in) Net weight: 25.0 kg (55.1 lb) Shipping weight: 27.7 kg (61.0 lb) Full-space measurement. EIA RS-426A, tested for eight hours. With recommended preset. Electro-Voice Installation manual 2018.01 | 01 | F.01U.345.998...
Page 30
Vertical off-axis frequency response (down): Vertical off-axis frequency response (up): Beamwidth: Dimensions: 230.6 mm [9.08 in] 451.4 mm [17.77 in] 433.0 mm [17.05 in] 683.6 mm [26.91 in] 336.6 mm [13.25 in] 2018.01 | 01 | F.01U.345.998 Installation manual Electro-Voice...
Dimensions (H x W x D): 684 mm x 433 mm x 451 mm (26.91 in x 17.05 in x 17.77 in) Net weight: 25.0 kg (55.1 lb) Shipping weight: 27.7 kg (61.0 lb) Full-space measurement. EIA RS-426A, tested for eight hours. With recommended preset. Electro-Voice Installation manual 2018.01 | 01 | F.01U.345.998...
Page 32
Vertical off-axis frequency response (down): Vertical off-axis frequency response (up): Beamwidth: Dimensions: 230.6 mm [9.08 in] 451.4 mm [17.77 in] 433.0 mm [17.05 in] 683.6 mm [26.91 in] 336.6 mm [13.25 in] 2018.01 | 01 | F.01U.345.998 Installation manual Electro-Voice...
Dimensions (H x W x D): 503 mm x 554 mm x 718 mm (19.78 in x 21.81 in x 28.27 in) Net weight: 32.6 kg (71.9 lb) Shipping weight: 36.5 kg (80.5 lb) Half-space measurement. EIA RS-426A, tested for eight hours. With recommended preset. Electro-Voice Installation manual 2018.01 | 01 | F.01U.345.998...
Page 34
EVC Compact Front-Loaded Loudspeakers Frequency response and impedance: Dimensions: 358.8 mm [14.13 in] 718.1 mm 554.0 mm [28.27 in] [21.81 in] 502.5 mm [19.78 in] 247.8 mm [9.76 in] 2018.01 | 01 | F.01U.345.998 Installation manual Electro-Voice...
33 Ω Transformer: 89 Hz High-pass per 50 W 100 W 100 Ω EN54-24 spectrum 100 W 200 W 50 Ω 200 W 400 W 25 Ω Table 8.1: Transformer ratings and taps Electro-Voice Installation manual 2018.01 | 01 | F.01U.345.998...
Page 36
Place the input panel horizontally face down with the green circuit board on the right. Place the transformer in the pocket on the left. The lead wires from the transformer should be pointed toward you. 2018.01 | 01 | F.01U.345.998 Installation manual Electro-Voice...
Page 37
- regardless of the number of speakers connected in parallel. As a result, EVC loudspeakers - including the subwoofers - sound virtually identical, whether they are used with a transformer or without. Electro-Voice Installation manual 2018.01 | 01 | F.01U.345.998...
EVC Compact Front-Loaded Loudspeakers Input panel covers For all EVC loudspeakers. Electro-Voice offers input panel covers that protect the electrical connections from moisture in outdoor installations or give the user of using quick-release NL4 type speaker connectors. CDG: optional dual-gland-nut input-panel cover to protect the input connections from water.
Need help?
Do you have a question about the EVC-1122-64 and is the answer not in the manual?
Questions and answers