Advertisement
Quick Links
Additional Instructions - Ozone Model
Example Ozone System
1. Setup your sauna as shown on the previous page.
2. Attach tubing from the Ozone Out port on your ozone generator to the
Ozone In port on the sauna, which is located at the back of the lower dome.
3. Turn on your oxygen source and ozone generator to the settings needed to
produce your desired ozone output. If you have an O3Elite, a chart is included
on the unit itself.
3. When fi nished with your ozone sauna session, turn off the ozone generator
fi rst and let the oxygen run for several minutes. Then turn off your oxygen.
Guide to Ozone Sauna Concentrations
LOW DOSES (getting started)
Oxygen: 1/8 LPM
Gamma Range: 12 to 33
MEDIUM DOSE (optimal range)
Oxygen: 1/8 LPM
Gamma Range: 32-53
HIGH DOSE (advanced/higher intensity)
Oxygen: 1/8 LPM
Gamma Range: 51-75
Far Infrared Sauna Dome
USER MANUAL
For models PL-O3SAUNA and FIRG112
www.promolife.com
www.facebook.com/promolifeinc
www.twitter.com/promolifeinc
1-888-742-3404
Advertisement
Related Manuals for Promolife PL-O3SAUNA
Summary of Contents for Promolife PL-O3SAUNA
- Page 1 3. When fi nished with your ozone sauna session, turn off the ozone generator fi rst and let the oxygen run for several minutes. Then turn off your oxygen. For models PL-O3SAUNA and FIRG112 Guide to Ozone Sauna Concentrations LOW DOSES (getting started)
- Page 2 40-60 minute duration is a good session. More is not necessarily better in terms of minutes and frequency of use. Disclosure: Always consult with your physician before using the sauna dome. Promolife and the manufacturer do not make any diagnosis or give medical recommendations.
Need help?
Do you have a question about the PL-O3SAUNA and is the answer not in the manual?
Questions and answers