HP Elite Slice for Meeting Rooms G2 Hardware Reference Manual page 21

b. Insert a rubber plug at the cable exit point (3) to secure the cable.
c. Remove the CoRC back cover from the shipping box (4) and attach it to the back of the CoRC (5).
6. If the Wireless Display Module is installed, perform the following steps to install the wireless receiver
transceiver:
NOTE: The transceiver must face the front of the Wireless Display Module. For the best performance,
be sure the line of sight between the transceiver and the Wireless Display Module is optimal.
a. Connect a display power cord to an AC outlet (1).
b. Use the included adhesive strip to secure the transceiver in place (2).
Setting up an Elite Slice G2 conferencing solution 15