Related Manuals for Aircast VenaFlow Elite
Summary of Contents for Aircast VenaFlow Elite
- Page 1 Operator’s Manual Prophylaxis for Deep Vein Thrombosis DJO, LLC 1430 Decision Street • Vista, CA 92081-8553 • USA t 800.336.6569 • f 800.936.6569 DJOglobal.com Rx Only 30B101_C ML 1511...
-
Page 3: Table Of Contents
Table of Contents Design philosophy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Function . -
Page 4: Design Philosophy
Fuse: 250V 2A IEC FA 5X20MM compression for the superior emptying of veins.³ The breathable and comfortable VenaFlow Elite calf, foot and thigh cuffs enhance the patient experience, assist in Storage increasing compliance and are compatible with one universal pump. -
Page 5: Intended Use/Indications
Accessories: of the leg. Do not use the VenaFlow Elite System where increased venous or lymphatic return is undesirable. Part #... -
Page 6: Pump Features
Single / Dual Leg indicator operation indicator 0 0 : 0 3 : 06 First 3 minutes (ramp Battery indicator * Note: not all VenaFlow Elite up) indicator Systems will contain a battery Patient compliance Single/Dual leg counter operation push button... -
Page 7: Symbol Definitions
Call for service 5) Install new power cord and reassemble power cord cover. Inflation cycle indication (Bars indicate cuffs are inflating) See VenaFlow Elite System operator’s manual Safety classification: Class 1 BF Telescoping Bed Hanger Replacement 250V 2A IEC FA 5X20MM... -
Page 8: Pump Set-Up
Pump Set-up Low Battery Alarm 1) Hang pump from bed frame (foot of 1) When there is approximately 15 minutes of charge left in the bed), bed rail, or rest on floor or table. battery, an audible alarm will beep 3 times every minute. To use the telescoping bed hanger, When there is less than approximately 5 minutes of charge press release button on the back of the... -
Page 9: Cuff Application
DJO Technical support at 800-336-6569 extension 5566 for further instructions. Battery Operation The VenaFlow Elite can be installed with a battery upon request at the time of the 2) Connect cuffs to the tubing that is attached to the pump. -
Page 10: Pump Operation
Single/Dual Leg Operation Alarm Single Leg Operation 1) Once powered on, the VenaFlow Elite System will default to 1) After system is turned on, within 3 minutes push the single leg operation button dual leg operation mode. In the event that the selected leg to indicate that single leg use is desired.
Need help?
Do you have a question about the VenaFlow Elite and is the answer not in the manual?
Questions and answers