Time_To_Dint - Omron NX-SL series Instruction & Reference Manual

2 Standard Functions

TIME_TO_DINT

This function converts a TIME variable to a DINT variable.
Instruction
TIME_TO_DINT
Variables
Name
In Data to con-
vert
Out Conversion
result
If you omit an input or output parameter, a building error will occur.
Boolean
In
Out
Function
This function converts TIME data In to DINT data Out.
Example When Value of In Is 1 day 1 h 1 min 30 s 90 ms (T#1d1h1m30s090ms)
• The value of Out will be DINT#90090090.
Additional Information
To convert DINT data to TIME data, refer to DINT_TO_TIME.
Precautions for Correct Use
• The input condition depends on whether the output is safety data or standard data. If the condition is
not met, a building error will occur.
• If you set a safety data type variable for the output terminal, set a safety data type variable for the
input terminal as well.
• If you set a standard data type variable for the output terminal, you can set either a safety data type
variable or a standard data type variable for the input terminal.
2 - 48
Name FB/FUN
Convert TIME to FUN
DINT
I/O Description
Input Duration
Output Integer
Bit strings
NX-series Safety Control Unit Instructions Reference Manual (Z931)
Graphic expression
TIME_TO_DINT
Valid range
T#0ms to T#0ms
T#49d17h2m47s295ms
DINT#0 to 2147483647 DINT#0
Integers
OK
Default
Durations
OK OK
OK