Numark MixTrack Pro II User Manual

Traktor pro 2.6

Hide thumbs Also See for MixTrack Pro II:

Table of Contents

Download this manual See also: User Manual

This document will explain the control surface of MixTrack Pro II as functioning with Traktor Pro 2.6 or

higher. The mapping file will set the GUI of Traktor Pro 2 to best be utilized with the MixTrack Pro II.

NOTE: Make sure to back up your current setup in Traktor Pro 2 before importing this map, and

follow the steps below to successfully load the Numark MixTrack Pro II TSI file.

Installation:

1. Place "Numark MixTrack Pro II Traktor Pro Map.tsi" on your desktop or a place on your computer that

is easy to locate.

2. Open Traktor Pro 2.

3. Press the Gear icon in the top left for Settings.

4. Click Import at the bottom of the Settings window.

5. Direct the computer to the location of "Numark MixTrack Pro II Traktor Pro Map.tsi" and click "Open"

6. Leave all of the suggested categories checked to ensure best integration with MixTrack Pro II.

7. Start DJing!!

1. Browser Knob – Rotate the knob to cycle through folders and tracks. Press the knob to toggle back

and forth between the library and the tree view (Press BACK to move up to the previous level.)

2. Load – Press one of these buttons while a track is selected to assign it to Deck A or B, respectively,

in the software.

3. Back – Cycles between different views available in the software.

4. Shift – Allows multiple control commands to be triggered when pressed first along with other buttons.

MixTrack Pro II/Traktor Pro 2.6 User Guide

Table of Contents

Do you have a question about the MixTrack Pro II and is the answer not in the manual?

Page 1 This document will explain the control surface of MixTrack Pro II as functioning with Traktor Pro 2.6 or higher. The mapping file will set the GUI of Traktor Pro 2 to best be utilized with the MixTrack Pro II. NOTE: Make sure to back up your current setup in Traktor Pro 2 before importing this map, and follow the steps below to successfully load the Numark MixTrack Pro II TSI file.
Page 2 5. Track Cue – Sets and recalls the main Cue point in the current track. Hold down the CUE button for temporary play of the cue point. The track will play for as long as the button is held down and return to the cue point once it is released.
Page 3 29. Crossfader – Controls the blend between the two decks. 30. High EQ – Controls the treble frequencies for the individual channels. 31. Mid EQ – Controls the mid range frequencies for the individual channels. 32. Low EQ – Controls the bass frequencies for the individual channels. 33.