Recording Crash Cam Footage; Taking A Still Photo (Dsc); Saved File Options - Navig8r Crash Cam Dual X User Manual

NAVC-817D

Recording crash cam footage

Turn on your NAVC-817D and press the REC button (unless auto REC on has been set with
ignition on). When recording commences, the LED indicator will flash BLUE and RED and
there will be a flashing RED dot on screen. (A timer will also start "ticking over" on screen).
The recorded file is then saved onto the Micro SD Card. You can manually stop recording by
pressing the OK button or turning the car ignition off (stopping power to the device).
Note: If G-Sensor is selected, recording will start automatically when there is movement
detected. This setting is ideal for when the car is parked or unattended. Note that if left on
battery power (car is turned off), the standby time and record time will be dependent on the
level of charge on the battery.
If the motion detection feature is selected whilst driving, the camera will stop recording
when no movement is detected, such as when stopped at a traffic light, but will recommence
recording when the car moves again.
In the event of an incident/accident
- Due to the "cycle recording" nature of this technology, older recorded files will be overwritten
(depending on the resolution settings and the memory capacity of the Micro SD card).
- Should you wish to KEEP (protect) the video footage of an incident from not being overwritten, press
the MENU button during recording. A "pad lock" confirmation icon will appear at the bottom right of
the screen.
- Alternately the in-built G sensor will trigger an auto save lock if it senses a bump (sensitivity is
selectable via the Menu), so that the file being recorded is not overwritten in the cycle record
process. The on-screen car icon will then begin flashing.

Taking a Still Photo (DSC)

Select CAMERA MODE using the MODE button.
Press OK to take a still image

Saved file options

From any playback screen PRESS and HOLD the menu button to access the DELETE and
PROTECT controls. Navigate these MENUs and option using the 1) UP and DOWN arrows
and the OK to select your choice.
When finished, use the MENU button to return back to the main Video recording screen.
Note: The Hardware settings can also be accessed in this options MENU
USER MANUAL
Navc-817D Manual Ver 2.3 06/2017
– Use Auto Bump File Save.
8