Led & Fan; Lcd; Clock; Information - Panasonic AU-EVA1 Manual

3. MENU settings (SYSTEM SETTINGS)
3-1-5. LED & FAN
Menu item
Set the tally lamp to be used
TALLY LED
during recording.
Set the access lamp to be used
ACCESS LED
when accessing memory card.
POWER LED Set the power indicator to be used.
Set rotation mode of the cooling
FAN SPEED
fan.

3-1-6. LCD

Menu item
BRIGHTNESS Adjust the brightness of the LCD
monitor.
COLOR LEVEL Adjust the saturation level of the
LCD monitor.
CONTRAST Adjust the contrast level of the
LCD monitor.
BACK LIGHT Adjust brightness of the backlight
of the LCD monitor.

3-1-7. CLOCK

Menu item
CLOCK
Set the built-in calendar.
SETTING
Set time difference to the calendar
TIME ZONE

information.

DATE FORMAT Set date format.
3-1-8. INFORMATION
Menu item
VERSION
MODEL
SERIAL NO.
VERSION
OPERATION
TOTAL OPERATION
TIME
IRIS DIAL
SENSOR TEMP Display ambient temperature of the
image sensor in C degree.
USB SERVICE
For service purpose
MODE
UPDATE
For firmware update operation
Description
Description
Description
Description
30
Value (factory default setting
underlined)
FRONT, REAR, BOTH, OFF
ON, OFF
ON, OFF
AUTO: Adjust rotation speed in
response to inside temperature of the
unit.
FULL: Rotate at a constant speed
Value (factory default setting
underlined)
-15 -- 0 -- 15
-15 -- 0 -- 15
-30 -- 0 -- 30
-1 , 0 , 1
Value (factory default setting
underlined)
---
-12:00 -- +13:00
Y-M-D , M-D-Y , D-M-Y
Value (factory default setting
underlined)
Display product model number
Display serial number
Display firmware version
Display accumulated power on time
in hours.
Display accumulated operation (turn)
times of IRIS dial in x100 times.
Example 000037 = 37°C
---
---