Lights Out Management; Introduction; Initial Login - Check Point Smart-1 50 Getting Started Manual

Chapter 7

Lights Out Management

This chapter discusses the Lights-Out Management (LOM) integrated card that is supplied with the Smart-1
50/150 appliance and basic configuration options.
In This Chapter
Introduction
Initial Login
Basic Configuration Options
Remotely Controlling the Appliance
Remotely Controlling the Power of the Appliance
Managing LOM Card Users
Configuring LOM Keyboard/mouse Settings
Configuring LOM Settings
Setting the Date and Time
Defining a LOM Login Message

Introduction

The Lights-Out Management (LOM) card enables you to remotely administer the appliance and perform
maintenance operations.
The LOM card is configured by connecting to the LOM port through a Web interface. The basic configuration
options of the LOM card are:

Appliance Control - Remote lights-out power management. Turning the power ON or OFF, or resetting
the appliance.

LOM User Management - Managing LOM card user accounts.

LOM Settings - Managing LOM IP settings.
This chapter describes the recommended procedures you can perform with the card.

Initial Login

1. Open a web browser and enter the default IP address of the LOM card: 192.168.0.100. The login page
appears.
2. Login with the default User name (admin) and password (admin), all lower case. The LOM home page
appears.
Note - Following 30 minutes of inactivity you
will automatically be logged out.
41
41
42
42
42
43
43
44
44
44
Page 41