Panasonic Toughbook CF-07 Series Reference Manual page 7

Standby/Hibernation Functions
7
Windows 98
When both [Turn off monitor] (in [Control Panel] - [Power Management] - [Power
Schemes]) and [Screen Saver] (in [Control Panel] - [Display] - [Screen Saver]) are
set, there are cases operations cannot resume in a normal manner from the standby
or hibernation mode.
When the screensaver setting is active, do not enter the standby or hibernation mode
while the [MS-DOS Prompt] is being displayed. There are cases operations cannot
resume in a normal manner.
Do not use the standby/hibernation mode when MS-DOS application or [MS-DOS Prompt]
(in [Start] - [Programs]) is running.
<Only when the port replicator is connected>
When the computer resumes from the standby/hibernation mode when MS-DOS
application is running, the screen may become completely black. In such cases, press
Alt + Tab .
Do not use the standby/hibernation mode if you have pressed F8 to start up the MS-
DOS mode.
If you are using a PC card, note that some cards may cease to function if the standby
or hibernation function is used several times. When this occurs, immediately shut
down Windows without using the standby or hibernation function.
When [Hibernation] is not displayed in [Power Switch] of the [Power] menu in the
Setup Utility, the hibernation specific partition is not available. Reinstall the operating
system to create a partition by using the Product Recovery CD-ROM.