Features; Overview - GE WattStation Installation And User Manual

Step 8: Remove the metal dead front by removing the four (4) screws that hold it in place to the
plastic enclosure
Step 9: Feed the supply power and ground wires through WattStation enclosure holes. Connect
supply power wires to line side of the field wiring block and ground wire to the ground bar
Step 10: Replace the deadfront shield, the RFID unit, the cables to the cellular modem, the front
cover and the oval snap-fit ring

3 Features

3.1 Overview

Internet connectivity to GE WattStation Connect offered over 3G cellular or WiFi
•
Access control and payment options available by RFID swipe and QR code scan
•
Ethernet troubleshooting port (WiFi-equipped units only)
•
Charging cord and connector provide link to electric vehicle
•
LED ring provides illumination around connector
•
Green indicator light displays when WattStation is in charge mode
•
Red indicator light displays when WattStation is in fault mode
•
Tamper-proof / theft-proof key lock secures WattStation to the wall bracket
•
Padlock option on connector provides additional physical security
•
Availability of plug-in or non-plug in version provides installation flexibility
•
Entry options for supply power cable at both bottom and rear and provide additional flexibility for
•
the hardwired version
© GE All Rights Reserved
12