Electrical System; Location Of Fuses; Adding Electrical Options; Truck-Body Connection - Peterbilt 330 Operator's Manual

Preventive Maintenance

ELECTRICAL SYSTEM

Location Of Fuses

Fuses are located inside the cab, left side, next to the driver's
door.
Fuse Replacement
CAUTION: Before replacing a fuse, turn OFF all
lights and accessories and remove the ignition
key to avoid damaging the electrical system.
• Be sure to replace a blown fuse with a fuse of the correct
rating.
• If a fuse blows repeatedly, do not keep on replacing it.
The cause of the short circuit or overload must be found
and eliminated.
CAUTION: Never patch fuses with tin foil or wire.
This may cause serious damage elsewhere in
the electrical circuit, and it may cause a fire.
See the Medium Duty Maintenance Manual for instructions
on fuse replacement.
Model 330

Adding Electrical Options

Spare circuits are located throughout the wiring for the dash.
For proper electrical system performance, refer to a wiring
diagram for your chassis before adding electrical options.

Truck-Body Connection

Your vehicle includes a junction box mounted to the frame for
wiring the vehicle body to the main chassis harness.
Refer to the Body Builder's Manual for further information on
using the Truck and Body Connection.

Batteries

WARNING! Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California to
cause cancer and reproductive harm. Wash
hands after handling.
PB1318 3/01
Electrical System
– 185 –