Error Codes - Sartorius CP324S Operating Instructions Manual

Error Codes

Error codes are shown on the main display for 2 seconds. The program then returns
automatically to the previous mode (e.g., weighing).
Display
No segments appear
on the display
h
l or Err 54
err 01
err 02
err 10
err 11
err 22
err 30
Cause
No AC power is available
The AC adapter is not
plugged in
The load exceeds the
balance/scale capacity
Something is touching
the load plate
Data output not compatible
with output format
Calibration parameter
not met; e.g.:
– balance/scale not zeroed
– balance/scale is loaded
The t key is blocked
when there is data in
the second tare memory
(net-total) – only 1 tare function
can be used at a time
Tare memory not allowed
Weight is too light or there is no
sample on the balance/scale
Interface port for printer
output is blocked
Solution
Check the AC power supply
Plug in the AC adapter
Unload the balance/scale
Move the object that is
touching the load place
Change the configuration in
the operating menu
Calibrate only when zero
is displayed
Press t to zero the
balance/scale
Unload the balance/scale
Press c to clear the
tare memory and release
the tare key
Press t
Increase the weight on the
balance/scale
Reset the menu (restore
factory settings)
or
Contact your local Sartorius
Service Center
63