Filter Specifications - Paccar PX 8 Operator's Manual

Filter Specifications

General Information
Fleetguard filters are standard on new PACCAR engines.
PACCAR recommends their use.
Fleetguard products meet all PACCAR test standards to pro-
vide the quality filtration necessary to achieve the engine's
design life. If other brands are substituted, the purchaser
should ensure the filter specification meet or exceed the
Fleetguard specifications.
PACCAR can not be responsible for problems caused by
non-genuine filters that do not meet PACCAR performance or
durability requirements.
– 58 –
Lubricating Oil Filter
Fleetguard Part Number
Fuel Filter (primary, pressure side)
Fleetguard Part Number
Fuel Filter (secondary, suction side, with
water-in-fuel sensor)
Fleetguard Part Number
Crankcase Breather Element
Fleetguard Part Number
Aftertreatment DEF
Dosing Unit Filter
NOTE: An LF9009 lubricating oil filter must be used.
A venturi type lubricating oil filter must be used in
order to benefit from the bypass filtration section of
the lubricating oil filter. Do not use an LF3000 lubri-
cating oil filter. Engine durability will be reduced by
using the wrong lubricating oil filter.
Y53-1030A 12/09
Maintenance Specifications
Filter Part Numbers
LF9009
FF5636
FS1065
CV5060300
2880298
PACCAR