Siemens SIMATIC S7-400 Operating Instructions Manual page 108

Programming the OPC UA client blocks
5.10 Error numbers
Done Error ErrorID (hex) Name
0 1 B00080C3
0 1 B0009085
0 1 B000800A
0 1 B0008723
0 1 B000F001
0 1 B000F002
0 1 B000F003
0 1 B000F004
0 1 B000F005
0 1 B000F006
0 1 B000F007
0 1 B000F010
0 1 B000F011
0 1 B0010001
0 1 B0010002
0 1 B0010003
0 1 B0010004
0 1 B0010005
0 1 B0010006
0 1 B0010007
0 1 B0010008
0 1 B0010009
0 1 B001000A
0 1 B001000B
0 1 B001000C
0 1 B0010101
0 1 B0010102
0 1 B0010103
0 1 B0010104
0 1 B0010105
0 1 B0020001
0 1 B0030001
0 1 B0030002
108
Meaning
The connection resources of the CPU are temporarily ex-
hausted.
The maximum memory space for items (64000 bytes) of the
OPC UA client has been exceeded.
The OPC client was not enabled in the configuration.
The read/write job references a non-existent data area in a
DB.
Two function blocks were called in one cycle.
OPC UA session not yet established. Call the UA_Connect
block again.
Communication error
Invalid value for the "SyntaxID" parameter in the UDT
"UAAnyPointer"
Invalid data type in UAAnyPointer
Invalid value for the "RepetitionFactor" parameter in the UDT
"UAAnyPointer"
Invalid operand area of UAAnyPointer
Invalid operand area in a read or write job: Arrays of inputs,
arrays of outputs, arrays of memory bits, arrays of local data
and arrays of local data of the predecessor block are not
permitted.
The bit offset must be zero.
Wrong data packet in UA_Connect
Invalid URL of a server end point
Invalid value for Timeout
Invalid value for SessionTimeout
Invalid value for MonitorConnection
Invalid transport profile
Invalid server URI
Invalid Security procedure
Invalid Security profile
Invalid value for UserIdentityToken
Invalid application name
No connection establishment to partners with security func-
tions (no authentication if security functions are disabled).
Enable the security functions.
Invalid format of the server end point URL. It must start with
"opc.tcp://".
The path of the server end point URL is not supported.
The client must not connect itself to the server of its own CP.
Invalid port
Invalid address. DNS is not supported.
Wrong data packet in UA_NameSpaceGetIndex
Wrong data packet in UA_NodeGetHandleList
Invalid NodeID Identifier
Operating Instructions, 01/2017, C79000-G8976-C427-02
CP 443-1 OPC UA