Fc1 Keyboard/Mod; Fc2 Cutoff/Envelope2; Fc2 Keyboard/Fc1 Mod Fc2 - ENSONIQ KT-76 Musician's Manual

Hide thumbs Also See for KT-76:
Table of Contents

Advertisement

Edit Sound
page 42

FC1 Keyboard/Mod

FC1 Keyboard
Sets the amount by which the location of a note on a keyboard will modulate the filter cutoff
frequency (keyboard filter tracking). The scaling effect of this parameter is based on a 76-note
keyboard, with a center break-point of F4+. To have the filter track the keyboard exactly, set FC1
Keyboard=+50.
Mod
Selects the source of modulation for the filter cutoff frequency from among the 15 available
modulators.
Mod Amount
Determines the amount that the modulation source will affect the filter cutoff frequency.
Edit Sound
page 43

FC2 Cutoff/Envelope2

FC2 Cutoff
Determines the initial, or manual, filter cutoff frequency. When Filter 2 is a low pass filter, it will
behave just like Filter 1. When Filter 2 is a high pass filter, a setting of 000 lets all the original
signal pass through. Higher cutoff settings on a high pass filter allow fewer low frequencies
through, somewhat like turning the bass down on a stereo system.
Envelope2
Determines the amount that Envelope 2 will affect the filter cutoff frequency.
Edit Sound
page 44

FC2 Keyboard/FC1 Mod FC2

FC2 Keyboard
Sets the amount that the location of a note on a keyboard will modulate the filter cutoff frequency
(keyboard filter tracking). The scaling effect of this parameter is based on a 76-note keyboard,
with a center break-point of F4+. To have the filter track the keyboard exactly, set FC2
Keyboard=+50.
FC1 Mod FC2
Allows the modulator assigned to FC1 to also modulate FC2. FC2 has no modulation source of
its own. Enabling this parameter is the only way to apply modulation to FC2. When "FC1
Mod FC2= ON" the modulation source for FC1 and its modulation amount will be applied to
FC2.
ENSONIQ KT Musician's Manual
FC1 Keyboard=+25 Mod=VEL * +29
i
Mod Source
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Section 6 — Standard Sound Parameters
Filter Cutoff
m
i
Mod Amount
-99 to +99
Various
-99 to +99
000 to 127
-99 to +99
-99 to +99
OFF or ON
23

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KT-76 and is the answer not in the manual?

Questions and answers

Related Products for ENSONIQ KT-76

This manual is also suitable for:

Kt-88

Table of Contents

Save PDF