Lens Removal Procedure
1. Return the lens shift to the center position
(1) Press the LENS SHIFT button. The LENS SHIFT dialog will appear.
(2) Press the ENTER or INPUT button while the dialog is displayed to execute
the CENTERING feature, which adjusts the lens to the center. A message
dialog is displayed for confirmation.
(3) Pressing the ►button performs CENTERING.
Note
You can also perform CENTERING in the standby mode by pressing the
•
FUNCTION and LENS SHIFT buttons on the control panel for 3 seconds at the
same time.
2. Turn off the projector
Turn off and unplug the projector, and allow the projector to sufficiently cool down.
3. Remove the front cover
Move and slide the front cover up while pressing the front cover from the underside and
remove the front cover from the projector.
Front cover
(upper part)
13