FABIA 2000
Electrical System
Multi-plug connector on partition panel
Both multi-plug connectors are located at the rear of the
left dash panel. Seen from the engine behind the wind-
screen wiper motor.
Contact assignment ⇒ Current Flow Diagrams, Electrical
Fault Finding and Fitting Locations.
Removing from the engine side
Removing wiper motor with linkage ⇒ Chap. 92-2.
–
–
Release Allen screw -arrow-.
–
It is now possible to remove the multi-pin connector.
Removing from the dash panel
Removing the dash panel ⇒ Body Work; Rep. Gr. 70.
–
–
Draw the relevant central locking -1- for the right and
-2- for the left towards the left or right.
–
The relevant connectors can be released and re-
moved by pressing the top catch -3-.
Installing
–
Installation is carried out in the reverse order.
Edition 12.04
S00.5304.12.20
Fuse Holder and Relay Carrier
3
2
1
97-1
97
S97-1256
S97-1257
S97-1429
3
page
Need help?
Do you have a question about the FABIA 2000 and is the answer not in the manual?
Questions and answers