Deleting A Vlan - Cisco Catalyst 2960 series Configuration Manual

Configuring VLANs
Command or Action
Step 7
show vlan {name vlan-name | id vlan-id}
Example:
Switch# show vlan name test20 id 20

Deleting a VLAN

When you delete a VLAN from a switch that is in VTP server mode, the VLAN is removed from the VLAN
database for all switches in the VTP domain. When you delete a VLAN from a switch that is in VTP transparent
mode, the VLAN is deleted only on that specific switch or a switch stack.
You cannot delete the default VLANs for the different media types: Ethernet VLAN 1 and FDDI or Token
Ring VLANs 1002 to 1005.
When you delete a VLAN, any ports assigned to that VLAN become inactive. They remain associated
Caution
with the VLAN (and thus inactive) until you assign them to a new VLAN.
SUMMARY STEPS
1. configure terminal
2. no vlan vlan-id
3. end
4. show vlan brief
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2 no vlan vlan-id
Example:
Switch(config)# no vlan 4
OL-29065
Purpose
Verifies your entries.
Purpose
Enters the global configuration mode.
Removes the VLAN by entering the VLAN ID.
Catalyst 2960-X Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX
How to Configure Normal-Range VLANs
49