Troubleshooting - Beko BFC621MB1 User Manual

mnllllillmr«lnlllllnula.
• It is normal that steam escapes during operation.»>
This is not a fault.
ll!lmullll!llliii!IIMI!I!nll!lll~
• When the metal parts are heated, they may expand and cause noise.>>>
This is not a fault.
ll!lll!!l!lil!
• The mains fuse is defective or has tripped.»>
Check fuses in the fuse box. If necessary, replace or
reset them.
• Product is not plugged into the (grounded) socket.»>
Check the plug connection.
• If the display does not light up when you switch the hob on again. »>
Disconnect the appliance at the
circuit breaker. Wait 20 seconds and then reconnect it.
• Overheat protection is active.»>
Allow your hob to cool down.
• The cooking pot is not suitable.»>
Check your pot.
M~inlllillllllllrl
• Oven lamp is defective.>>>
Replace oven lamp.
• Power is cut. > > >
Check if there is power. Check the fuses in the fuse box. If necessary, replace
or reset the fuses.
~Dn~tunllt~l
• Function and/or Temperature are not set.»>
Set the function and the temperature with the
Function and/or Temperature knob/key.
• Power is cut. > > >
Check if there is power. Check the fuses in the fuse box. If necessary, replace
or reset the fuses.
~~1!1111111111111.11111.111~
• You have not placed the pot on the active cooking zone.>>> Check if there is a pot on the cooking zone.
• Your pot is not compatible with induction cooking.»> Check if your cooking pot is compatible with
induction hob.
• The cooking pot is not centered properly or the bottom surface of the pot is not wide enough for the
cooking zone.>>> Choose a pot wide enough and center the pot on the cooking zone properly.
• . . . . . . . . . . . .
gooking.pot.qrcog~ing.zone.i~.oy~rhe9t~9.·
. . .
???.A11qv;~t~er1l
. . to.cool down.
I!IJ!qiiiHBI!ni!II!Hnll~!lllll!~!ll!llllu~
• Cooking time for the selected cooking zone may be over.>>> You may set a new cooking time or finish
cooking.
• Overheat protection is active. > > > Allow your hob to cool down.
• .. Anobject maybe covering the touch control paneL>» Remove the object on the panel.
rlll!lull!lnliim!inll~IHBI!II!III!!~
• Your pot is not compatible with induction cooking.>>> Check if your cooking pot is compatible with
induction hob.
• The cooking pot is not centered properly or the bottom surface of the pot is not wide enough for the
cookin zone.>>> Choose a pot wide enou hand center the pot on the cookin zone properly.
• Consult the Authorised Service Agent or technician with licence or the dealer where you have purchased the
1
product if you can not remedy the trouble although you have implemented the instructions in this section. Never
attempt to repair a defective product yourself.
38/EN