Page 2
Classic 4 User’s Guide User’s Guide The Classic 4 system installed on this fine instrument offers the quality sound and versatile tone shaping that you expect from Fishman. At the heart of the system is our classic equalizer which lets you zero in on the four key frequency bands for acoustic guitar. The Classic 4 system utilizes the Fishman Sonicore™...
Page 3
Classic 4 User’s Guide Endpin jack Plug a standard instrument cable from the endpin jack to a stage amp, a DI, or an unbalanced microphone input on a mixer. When they are plugged in, the preamp switches on. To conserve battery life, remember to unplug the endpin jack when you are not using the pickup system.
Page 4
Classic 4 User’s Guide Volume Bass A boost here above the center detent will add depth and weight to the sound of the instrument. Move the bass slider below the center detent to tighten up a big and boomy tone. Middle More than any other control, the middle slider can affect the character of your instrument’s tone.
Page 5
Classic 4 User’s Guide Sample EQ Settings Here are a few suggested settings for the Classic 4: Finger Style BATT This is a popular eq setting that emphasizes extreme bass and treble. This will add fullness to the bass and definition to the treble.
Classic 4 User’s Guide Specifications Nominal Input Level -18 dBV Input Overload -4dBV (20 Hz- 20 kHz) Input Impedance 20 M Ohm Output Impedance Less than 3.5 k Ohm Nominal Output Level -6 dBV Less than .04%, -18 dBV input Signal to Noise Ratio 77 dB (A weighted, referred to nominal –18 dBV input)
Need help?
Do you have a question about the Fishman Classic 4 and is the answer not in the manual?
Questions and answers