Fitting And Removal Of Base : Prolite Xu2492Hsu - Iiyama ProLite XUB2492HSU User Manual

FITTING AND REMOVAL OF BASE : ProLite XU2492HSU

 Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor flat on a table with front face down.
Hold the monitor and push the Stand until it clicks and
is secure.
Install the stand-base to the stand.
Use 'thumb screw' provided to secure base to monitor
column.
Place the Cable Holder.
<Removal>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor flat on a table with front face down.
Remove 'thumb screw' to remove base from monitor
column.
Press the hook and remove the stand.
Pull the hook of the Cable Holder outside and remove
it.
Cable Holder
Thumb screw for
Stand-Base fixing
Hook
Cable Holder
BEFORE YOU OPERATE THE MONITOR 7
Stand
Stand-Base
Thumb screw for
Stand-Base fixing